Add option to rotate the display (#27)

I needed to cut the bootsplash to make room for adding this features.

Reviewed-on: https://git.pinkduck.xyz/awonak/libGravity/pulls/27

firmware/Gravity/Gravity.ino

@@ -66,10 +66,6 @@ void setup() {
     // Start Gravity.
     gravity.Init();
 
-    // Show bootsplash when initializing firmware.
-    Bootsplash();
-    delay(2000);
-
     // Initialize the state manager. This will load settings from EEPROM
     stateManager.initialize(app);
     InitGravity(app);
@@ -213,31 +209,34 @@ void HandleEncoderPressed() {
     // Check if leaving editing mode should apply a selection.
     if (app.editing_param) {
         if (app.selected_channel == 0) {  // main page
-            // TODO: rewrite as switch
-            if (app.selected_param == PARAM_MAIN_ENCODER_DIR) {
+            switch (app.selected_param) {
+                case PARAM_MAIN_ENCODER_DIR:
                     app.encoder_reversed = app.selected_sub_param == 1;
                     gravity.encoder.SetReverseDirection(app.encoder_reversed);
-            }
-            if (app.selected_param == PARAM_MAIN_SAVE_DATA) {
+                    break;
+                case PARAM_MAIN_ROTATE_DISP:
+                    app.rotate_display = app.selected_sub_param == 1;
+                    gravity.display.setFlipMode(app.rotate_display ? 1 : 0);
+                    break;
+                case PARAM_MAIN_SAVE_DATA:
                     if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
                         app.selected_save_slot = app.selected_sub_param;
                         stateManager.saveData(app);
                     }
-            }
-            if (app.selected_param == PARAM_MAIN_LOAD_DATA) {
+                    break;
+                case PARAM_MAIN_LOAD_DATA:
                     if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
                         app.selected_save_slot = app.selected_sub_param;
                         stateManager.loadData(app, app.selected_save_slot);
                         InitGravity(app);
                     }
-            }
-            if (app.selected_param == PARAM_MAIN_FACTORY_RESET) {
+                    break;
+                case PARAM_MAIN_FACTORY_RESET:
                     if (app.selected_sub_param == 0) {  // Erase
-                    // Show bootsplash during slow erase operation.
-                    Bootsplash();
                         stateManager.factoryReset(app);
                         InitGravity(app);
                     }
+                    break;
             }
         }
         // Only mark dirty and reset selected_sub_param when leaving editing mode.
@@ -313,6 +312,7 @@ void editMainParameter(int val) {
         }
         // These changes are applied upon encoder button press.
         case PARAM_MAIN_ENCODER_DIR:
+        case PARAM_MAIN_ROTATE_DISP:
             updateSelection(app.selected_sub_param, val, 2);
             break;
         case PARAM_MAIN_SAVE_DATA:
@@ -381,6 +381,7 @@ void InitGravity(AppState& app) {
     gravity.clock.SetTempo(app.tempo);
     gravity.clock.SetSource(app.selected_source);
     gravity.encoder.SetReverseDirection(app.encoder_reversed);
+    gravity.display.setFlipMode(app.rotate_display ? 1 : 0);
 }
 
 void ResetOutputs() {

firmware/Gravity/app_state.h

@@ -31,6 +31,7 @@ struct AppState {
     Clock::Pulse selected_pulse = Clock::PULSE_PPQN_24;
     bool editing_param = false;
     bool encoder_reversed = false;
+    bool rotate_display = false;
     bool refresh_screen = true;
 };
 

firmware/Gravity/channel.h

@@ -86,6 +86,7 @@ class Channel {
 
     void setClockMod(int index) {
         base_clock_mod_index = constrain(index, 0, MOD_CHOICE_SIZE - 1);
+        _recalculatePulses();
     }
 
     void setProbability(int prob) {
@@ -94,13 +95,16 @@ class Channel {
 
     void setDutyCycle(int duty) {
         base_duty_cycle = constrain(duty, 1, 99);
+        _recalculatePulses();
     }
 
     void setOffset(int off) {
         base_offset = constrain(off, 0, 99);
+        _recalculatePulses();
     }
     void setSwing(int val) {
         base_swing = constrain(val, 50, 95);
+        _recalculatePulses();
     }
 
     // Euclidean

firmware/Gravity/display.h

@@ -104,6 +104,7 @@ enum ParamsMainPage : uint8_t {
     PARAM_MAIN_RESET,
     PARAM_MAIN_PULSE,
     PARAM_MAIN_ENCODER_DIR,
+    PARAM_MAIN_ROTATE_DISP,
     PARAM_MAIN_SAVE_DATA,
     PARAM_MAIN_LOAD_DATA,
     PARAM_MAIN_FACTORY_RESET,
@@ -124,22 +125,6 @@ enum ParamsChannelPage : uint8_t {
     PARAM_CH_LAST,
 };
 
-// Common/resused strings stored as const to save on flash memory.
-const char* const STR_24_PPQN = "24 PPQN";
-const char* const STR_4_PPQN = "4 PPQN";
-const char* const STR_1_PPQN = "1 PPQN";
-const char* const STR_CV_1 = "CV 1";
-const char* const STR_CV_2 = "CV 2";
-const char* const STR_NONE = "NONE";
-const char* const STR_EXT = "EXT";
-const char* const STR_X = "X";
-const char* const STR_DEFAULT = "DEFAULT";
-const char* const STR_REVERSED = "REVERSED";
-const char* const STR_FLIPPED = "FLIPPED";
-const char* const STR_BACK = "BACK TO MAIN";
-const char* const STR_EUC_STEPS = "EUCLID STEPS";
-const char* const STR_EUC_HITS = "EUCLID HITS";
-
 // Helper function to draw centered text
 void drawCenteredText(const char* text, int y, const uint8_t* font) {
     gravity.display.setFont(font);
@@ -253,27 +238,27 @@ void DisplayMainPage() {
         case PARAM_MAIN_TEMPO:
             // Serial MIDI is too unstable to display bpm in real time.
             if (app.selected_source == Clock::SOURCE_EXTERNAL_MIDI) {
-                mainText = STR_EXT;
+                mainText = F("EXT");
             } else {
                 mainText = String(gravity.clock.Tempo());
             }
             subText = F("BPM");
             break;
         case PARAM_MAIN_SOURCE:
-            mainText = STR_EXT;
+            mainText = F("EXT");
             switch (app.selected_source) {
                 case Clock::SOURCE_INTERNAL:
                     mainText = F("INT");
                     subText = F("CLOCK");
                     break;
                 case Clock::SOURCE_EXTERNAL_PPQN_24:
-                    subText = STR_24_PPQN;
+                    subText = F("24 PPQN");
                     break;
                 case Clock::SOURCE_EXTERNAL_PPQN_4:
-                    subText = STR_4_PPQN;
+                    subText = F("4 PPQN");
                     break;
                 case Clock::SOURCE_EXTERNAL_PPQN_1:
-                    subText = STR_1_PPQN;
+                    subText = F("1 PPQN");
                     break;
                 case Clock::SOURCE_EXTERNAL_MIDI:
                     subText = F("MIDI");
@@ -284,13 +269,13 @@ void DisplayMainPage() {
             mainText = F("RUN");
             switch (app.cv_run) {
                 case 0:
-                    subText = STR_NONE;
+                    subText = F("NONE");
                     break;
                 case 1:
-                    subText = STR_CV_1;
+                    subText = F("CV 1");
                     break;
                 case 2:
-                    subText = STR_CV_2;
+                    subText = F("CV 2");
                     break;
             }
             break;
@@ -298,13 +283,13 @@ void DisplayMainPage() {
             mainText = F("RST");
             switch (app.cv_reset) {
                 case 0:
-                    subText = STR_NONE;
+                    subText = F("NONE");
                     break;
                 case 1:
-                    subText = STR_CV_1;
+                    subText = F("CV 1");
                     break;
                 case 2:
-                    subText = STR_CV_2;
+                    subText = F("CV 2");
                     break;
             }
             break;
@@ -315,25 +300,29 @@ void DisplayMainPage() {
                     subText = F("PULSE OFF");
                     break;
                 case Clock::PULSE_PPQN_24:
-                    subText = STR_24_PPQN;
+                    subText = F("24 PPQN PULSE");
                     break;
                 case Clock::PULSE_PPQN_4:
-                    subText = STR_4_PPQN;
+                    subText = F("4 PPQN PULSE");
                     break;
                 case Clock::PULSE_PPQN_1:
-                    subText = STR_1_PPQN;
+                    subText = F("1 PPQN PULSE");
                     break;
             }
             break;
         case PARAM_MAIN_ENCODER_DIR:
             mainText = F("DIR");
-            subText = app.selected_sub_param == 0 ? STR_DEFAULT : STR_REVERSED;
+            subText = app.selected_sub_param == 0 ? F("DEFAULT") : F("REVERSED");
+            break;
+        case PARAM_MAIN_ROTATE_DISP:
+            mainText = F("ROT");
+            subText = app.selected_sub_param == 0 ? F("DEFAULT") : F("FLIPPED");
             break;
         case PARAM_MAIN_SAVE_DATA:
         case PARAM_MAIN_LOAD_DATA:
             if (app.selected_sub_param == StateManager::MAX_SAVE_SLOTS) {
-                mainText = STR_X;
-                subText = STR_BACK;
+                mainText = F("x");
+                subText = F("BACK TO MAIN");
             } else {
                 // Indicate currently active slot.
                 if (app.selected_sub_param == app.selected_save_slot) {
@@ -350,8 +339,8 @@ void DisplayMainPage() {
                 mainText = F("DEL");
                 subText = F("FACTORY RESET");
             } else {
-                mainText = STR_X;
-                subText = STR_BACK;
+                mainText = F("x");
+                subText = F("BACK TO MAIN");
             }
             break;
     }
@@ -360,7 +349,7 @@ void DisplayMainPage() {
     drawCenteredText(subText.c_str(), SUB_TEXT_Y, TEXT_FONT);
 
     // Draw Main Page menu items
-    String menu_items[PARAM_MAIN_LAST] = {F("TEMPO"), F("SOURCE"), F("CLK RUN"), F("CLK RESET"), F("PULSE OUT"), F("ENCODER DIR"), F("SAVE"), F("LOAD"), F("ERASE")};
+    String menu_items[PARAM_MAIN_LAST] = {F("TEMPO"), F("SOURCE"), F("CLK RUN"), F("CLK RESET"), F("PULSE OUT"), F("ENCODER DIR"), F("ROTATE DISP"), F("SAVE"), F("LOAD"), F("ERASE")};
     drawMenuItems(menu_items, PARAM_MAIN_LAST);
 }
 
@@ -410,16 +399,16 @@ void DisplayChannelPage() {
             ch.getSwing() == 50
                 ? mainText = F("OFF")
                 : mainText = String(withCvMod ? ch.getSwingWithMod(cv1, cv2) : ch.getSwing()) + F("%");
-            subText = F("DOWN BEAT");
+            subText = "DOWN BEAT";
             swingDivisionMark();
             break;
         case PARAM_CH_EUC_STEPS:
             mainText = String(withCvMod ? ch.getStepsWithMod(cv1, cv2) : ch.getSteps());
-            subText = STR_EUC_STEPS;
+            subText = "EUCLID STEPS";
             break;
         case PARAM_CH_EUC_HITS:
             mainText = String(withCvMod ? ch.getHitsWithMod(cv1, cv2) : ch.getHits());
-            subText = STR_EUC_HITS;
+            subText = "EUCLID HITS";
             break;
         case PARAM_CH_CV1_DEST:
         case PARAM_CH_CV2_DEST: {
@@ -444,10 +433,10 @@ void DisplayChannelPage() {
                     subText = F("SWING");
                     break;
                 case CV_DEST_EUC_STEPS:
-                    subText = STR_EUC_STEPS;
+                    subText = F("EUCLID STEPS");
                     break;
                 case CV_DEST_EUC_HITS:
-                    subText = STR_EUC_HITS;
+                    subText = F("EUCLID HITS");
                     break;
             }
             break;
@@ -510,22 +499,4 @@ void UpdateDisplay() {
     } while (gravity.display.nextPage());
 }
 
-void Bootsplash() {
-    gravity.display.firstPage();
-    do {
-        int textWidth;
-        String loadingText = F("LOADING....");
-        gravity.display.setFont(TEXT_FONT);
-
-        textWidth = gravity.display.getStrWidth(StateManager::SKETCH_NAME);
-        gravity.display.drawStr(16 + (textWidth / 2), 20, StateManager::SKETCH_NAME);
-
-        textWidth = gravity.display.getStrWidth(StateManager::SEMANTIC_VERSION);
-        gravity.display.drawStr(16 + (textWidth / 2), 32, StateManager::SEMANTIC_VERSION);
-
-        textWidth = gravity.display.getStrWidth(loadingText.c_str());
-        gravity.display.drawStr(26 + (textWidth / 2), 44, loadingText.c_str());
-    } while (gravity.display.nextPage());
-}
-
 #endif  // DISPLAY_H

firmware/Gravity/save_state.cpp

@@ -17,7 +17,7 @@
 
 // Define the constants for the current firmware.
 const char StateManager::SKETCH_NAME[] = "ALT GRAVITY";
-const char StateManager::SEMANTIC_VERSION[] = "V2.0.0BETA4";  // NOTE: This should match the version in the library.properties file.
+const char StateManager::SEMANTIC_VERSION[] = "2.0.0";  // NOTE: This should match the version in the library.properties file.
 
 // Number of available save slots.
 const byte StateManager::MAX_SAVE_SLOTS = 10;
@@ -212,6 +212,7 @@ void StateManager::_saveMetadata(const AppState& app) {
     // Global user settings
     current_meta.selected_save_slot = app.selected_save_slot;
     current_meta.encoder_reversed = app.encoder_reversed;
+    current_meta.rotate_display = app.rotate_display;
 
     EEPROM.put(METADATA_START_ADDR, current_meta);
     interrupts();

firmware/Gravity/save_state.h

@@ -52,11 +52,12 @@ class StateManager {
 
     // This struct holds the data that identifies the firmware version.
     struct Metadata {
-        char sketch_name[16];
-        char version[16];
+        char sketch_name[12];
+        char version[5];
         // Additional global/hardware settings
         byte selected_save_slot;
         bool encoder_reversed;
+        bool rotate_display;
     };
     struct ChannelState {
         byte base_clock_mod_index;

library.properties

@@ -1,5 +1,5 @@
 name=libGravity
-version=2.0.0beta3
+version=2.0.0
 author=Adam Wonak
 maintainer=awonak <github.com/awonak>
 sentence=Hardware abstraction library for Sitka Instruments Gravity eurorack module

src/clock.h

@@ -35,7 +35,6 @@ class Clock {
         SOURCE_INTERNAL,
         SOURCE_EXTERNAL_PPQN_24,
         SOURCE_EXTERNAL_PPQN_4,
-        SOURCE_EXTERNAL_PPQN_2,
         SOURCE_EXTERNAL_PPQN_1,
         SOURCE_EXTERNAL_MIDI,
         SOURCE_LAST,
@@ -43,9 +42,9 @@ class Clock {
 
     enum Pulse {
         PULSE_NONE,
-        PULSE_PPQN_1,
-        PULSE_PPQN_4,
         PULSE_PPQN_24,
+        PULSE_PPQN_4,
+        PULSE_PPQN_1,
         PULSE_LAST,
     };
 
@@ -98,10 +97,6 @@ class Clock {
                 uClock.setClockMode(uClock.EXTERNAL_CLOCK);
                 uClock.setInputPPQN(uClock.PPQN_4);
                 break;
-            case SOURCE_EXTERNAL_PPQN_2:
-                uClock.setClockMode(uClock.EXTERNAL_CLOCK);
-                uClock.setInputPPQN(uClock.PPQN_2);
-                break;
             case SOURCE_EXTERNAL_PPQN_1:
                 uClock.setClockMode(uClock.EXTERNAL_CLOCK);
                 uClock.setInputPPQN(uClock.PPQN_1);