initial commit of new GridSeq firmware

I needed to cut the bootsplash to make room for adding this features.

Reviewed-on: https://git.pinkduck.xyz/awonak/libGravity/pulls/27

firmware/Gravity/Gravity.ino

@@ -66,10 +66,6 @@ void setup() {
     // Start Gravity.
     gravity.Init();
 
-    // Show bootsplash when initializing firmware.
-    Bootsplash();
-    delay(2000);
-
     // Initialize the state manager. This will load settings from EEPROM
     stateManager.initialize(app);
     InitGravity(app);
@@ -213,31 +209,34 @@ void HandleEncoderPressed() {
     // Check if leaving editing mode should apply a selection.
     if (app.editing_param) {
         if (app.selected_channel == 0) {  // main page
-            // TODO: rewrite as switch
-            if (app.selected_param == PARAM_MAIN_ENCODER_DIR) {
-                app.encoder_reversed = app.selected_sub_param == 1;
-                gravity.encoder.SetReverseDirection(app.encoder_reversed);
-            }
-            if (app.selected_param == PARAM_MAIN_SAVE_DATA) {
-                if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
-                    app.selected_save_slot = app.selected_sub_param;
-                    stateManager.saveData(app);
-                }
-            }
-            if (app.selected_param == PARAM_MAIN_LOAD_DATA) {
-                if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
-                    app.selected_save_slot = app.selected_sub_param;
-                    stateManager.loadData(app, app.selected_save_slot);
-                    InitGravity(app);
-                }
-            }
-            if (app.selected_param == PARAM_MAIN_FACTORY_RESET) {
-                if (app.selected_sub_param == 0) {  // Erase
-                    // Show bootsplash during slow erase operation.
-                    Bootsplash();
-                    stateManager.factoryReset(app);
-                    InitGravity(app);
-                }
+            switch (app.selected_param) {
+                case PARAM_MAIN_ENCODER_DIR:
+                    app.encoder_reversed = app.selected_sub_param == 1;
+                    gravity.encoder.SetReverseDirection(app.encoder_reversed);
+                    break;
+                case PARAM_MAIN_ROTATE_DISP:
+                    app.rotate_display = app.selected_sub_param == 1;
+                    gravity.display.setFlipMode(app.rotate_display ? 1 : 0);
+                    break;
+                case PARAM_MAIN_SAVE_DATA:
+                    if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
+                        app.selected_save_slot = app.selected_sub_param;
+                        stateManager.saveData(app);
+                    }
+                    break;
+                case PARAM_MAIN_LOAD_DATA:
+                    if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
+                        app.selected_save_slot = app.selected_sub_param;
+                        stateManager.loadData(app, app.selected_save_slot);
+                        InitGravity(app);
+                    }
+                    break;
+                case PARAM_MAIN_FACTORY_RESET:
+                    if (app.selected_sub_param == 0) {  // Erase
+                        stateManager.factoryReset(app);
+                        InitGravity(app);
+                    }
+                    break;
             }
         }
         // Only mark dirty and reset selected_sub_param when leaving editing mode.
@@ -313,6 +312,7 @@ void editMainParameter(int val) {
         }
         // These changes are applied upon encoder button press.
         case PARAM_MAIN_ENCODER_DIR:
+        case PARAM_MAIN_ROTATE_DISP:
             updateSelection(app.selected_sub_param, val, 2);
             break;
         case PARAM_MAIN_SAVE_DATA:
@@ -381,6 +381,7 @@ void InitGravity(AppState& app) {
     gravity.clock.SetTempo(app.tempo);
     gravity.clock.SetSource(app.selected_source);
     gravity.encoder.SetReverseDirection(app.encoder_reversed);
+    gravity.display.setFlipMode(app.rotate_display ? 1 : 0);
 }
 
 void ResetOutputs() {

firmware/Gravity/app_state.h

@@ -31,6 +31,7 @@ struct AppState {
     Clock::Pulse selected_pulse = Clock::PULSE_PPQN_24;
     bool editing_param = false;
     bool encoder_reversed = false;
+    bool rotate_display = false;
     bool refresh_screen = true;
 };
 

firmware/Gravity/channel.h

@@ -86,6 +86,7 @@ class Channel {
 
     void setClockMod(int index) {
         base_clock_mod_index = constrain(index, 0, MOD_CHOICE_SIZE - 1);
+        _recalculatePulses();
     }
 
     void setProbability(int prob) {
@@ -94,13 +95,16 @@ class Channel {
 
     void setDutyCycle(int duty) {
         base_duty_cycle = constrain(duty, 1, 99);
+        _recalculatePulses();
     }
 
     void setOffset(int off) {
         base_offset = constrain(off, 0, 99);
+        _recalculatePulses();
     }
     void setSwing(int val) {
         base_swing = constrain(val, 50, 95);
+        _recalculatePulses();
     }
 
     // Euclidean

firmware/Gravity/display.h

@@ -104,6 +104,7 @@ enum ParamsMainPage : uint8_t {
     PARAM_MAIN_RESET,
     PARAM_MAIN_PULSE,
     PARAM_MAIN_ENCODER_DIR,
+    PARAM_MAIN_ROTATE_DISP,
     PARAM_MAIN_SAVE_DATA,
     PARAM_MAIN_LOAD_DATA,
     PARAM_MAIN_FACTORY_RESET,
@@ -256,9 +257,6 @@ void DisplayMainPage() {
                 case Clock::SOURCE_EXTERNAL_PPQN_4:
                     subText = F("4 PPQN");
                     break;
-                case Clock::SOURCE_EXTERNAL_PPQN_2:
-                    subText = F("2 PPQN");
-                    break;
                 case Clock::SOURCE_EXTERNAL_PPQN_1:
                     subText = F("1 PPQN");
                     break;
@@ -316,6 +314,10 @@ void DisplayMainPage() {
             mainText = F("DIR");
             subText = app.selected_sub_param == 0 ? F("DEFAULT") : F("REVERSED");
             break;
+        case PARAM_MAIN_ROTATE_DISP:
+            mainText = F("ROT");
+            subText = app.selected_sub_param == 0 ? F("DEFAULT") : F("FLIPPED");
+            break;
         case PARAM_MAIN_SAVE_DATA:
         case PARAM_MAIN_LOAD_DATA:
             if (app.selected_sub_param == StateManager::MAX_SAVE_SLOTS) {
@@ -347,7 +349,7 @@ void DisplayMainPage() {
     drawCenteredText(subText.c_str(), SUB_TEXT_Y, TEXT_FONT);
 
     // Draw Main Page menu items
-    String menu_items[PARAM_MAIN_LAST] = {F("TEMPO"), F("SOURCE"), F("CLK RUN"), F("CLK RESET"), F("PULSE OUT"), F("ENCODER DIR"), F("SAVE"), F("LOAD"), F("ERASE")};
+    String menu_items[PARAM_MAIN_LAST] = {F("TEMPO"), F("SOURCE"), F("CLK RUN"), F("CLK RESET"), F("PULSE OUT"), F("ENCODER DIR"), F("ROTATE DISP"), F("SAVE"), F("LOAD"), F("ERASE")};
     drawMenuItems(menu_items, PARAM_MAIN_LAST);
 }
 
@@ -369,7 +371,7 @@ void DisplayChannelPage() {
 
     switch (app.selected_param) {
         case PARAM_CH_MOD: {
-            int mod_value = withCvMod ? ch.getClockModWithMod(cv1, cv2): ch.getClockMod();
+            int mod_value = withCvMod ? ch.getClockModWithMod(cv1, cv2) : ch.getClockMod();
             if (mod_value > 1) {
                 mainText = F("/");
                 mainText += String(mod_value);
@@ -497,22 +499,4 @@ void UpdateDisplay() {
     } while (gravity.display.nextPage());
 }
 
-void Bootsplash() {
-    gravity.display.firstPage();
-    do {
-        int textWidth;
-        String loadingText = F("LOADING....");
-        gravity.display.setFont(TEXT_FONT);
-
-        textWidth = gravity.display.getStrWidth(StateManager::SKETCH_NAME);
-        gravity.display.drawStr(16 + (textWidth / 2), 20, StateManager::SKETCH_NAME);
-
-        textWidth = gravity.display.getStrWidth(StateManager::SEMANTIC_VERSION);
-        gravity.display.drawStr(16 + (textWidth / 2), 32, StateManager::SEMANTIC_VERSION);
-
-        textWidth = gravity.display.getStrWidth(loadingText.c_str());
-        gravity.display.drawStr(26 + (textWidth / 2), 44, loadingText.c_str());
-    } while (gravity.display.nextPage());
-}
-
 #endif  // DISPLAY_H

firmware/Gravity/save_state.cpp

@@ -17,7 +17,7 @@
 
 // Define the constants for the current firmware.
 const char StateManager::SKETCH_NAME[] = "ALT GRAVITY";
-const char StateManager::SEMANTIC_VERSION[] = "V2.0.0BETA4";  // NOTE: This should match the version in the library.properties file.
+const char StateManager::SEMANTIC_VERSION[] = "2.0.0";  // NOTE: This should match the version in the library.properties file.
 
 // Number of available save slots.
 const byte StateManager::MAX_SAVE_SLOTS = 10;
@@ -212,6 +212,7 @@ void StateManager::_saveMetadata(const AppState& app) {
     // Global user settings
     current_meta.selected_save_slot = app.selected_save_slot;
     current_meta.encoder_reversed = app.encoder_reversed;
+    current_meta.rotate_display = app.rotate_display;
 
     EEPROM.put(METADATA_START_ADDR, current_meta);
     interrupts();

firmware/Gravity/save_state.h

@@ -52,11 +52,12 @@ class StateManager {
 
     // This struct holds the data that identifies the firmware version.
     struct Metadata {
-        char sketch_name[16];
-        char version[16];
+        char sketch_name[12];
+        char version[5];
         // Additional global/hardware settings
         byte selected_save_slot;
         bool encoder_reversed;
+        bool rotate_display;
     };
     struct ChannelState {
         byte base_clock_mod_index;

firmware/GridSeq/GridSeq.ino

@@ -0,0 +1,167 @@
+/**
+ * @file GridSeq.ino
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Grid based step sequencer firmware for Gravity by Sitka Instruments.
+ * @version v1.0.0 - August 2025 awonak
+ * @date 2025-08-12
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ * Grid based step sequencer with lots of dynamic features.
+ * 
+ * Pattern:
+ *      - length
+ *      - clock division
+ *      - probability
+ *      - fill density
+ *      - direction (fwd, rev, pend, rand)
+ *      - mode:
+ *          - step equencer
+ *          - euclidean rhythm
+ *          - pattern (grids like presets)
+ * 
+ * Step:
+ *      - gate / trigger
+ *      - duty / duration
+ *      - probability
+ *      - ratchet / retrig
+ * 
+ * Global:
+ *      - internal / external / midi
+ *      - run / reset
+ *      - mute
+ *      - save / load banks
+ *      - 6 channel / 3 channel accent
+ *
+ * ENCODER:
+ *      Press: change between selecting a parameter and editing the parameter.
+ *      Hold & Rotate: change current selected output channel.
+ *
+ * BTN1:
+ *      Play/pause - start or stop the internal clock.
+ *
+ * BTN2:
+ *      Shift - hold and rotate encoder to change current selected output channel.
+ *
+ * EXT:
+ *      External clock input. When Gravity is set to INTERNAL or MIDI clock
+ *      source, this input is used to reset clocks.
+ *
+ * CV1:
+ *      External analog input used to provide modulation to any channel parameter.
+ *
+ * CV2:
+ *      External analog input used to provide modulation to any channel parameter.
+ *
+ */
+
+#include <libGravity.h>
+
+#include "app_state.h"
+#include "channel.h"
+#include "display.h"
+
+AppState app;
+
+//
+// Arduino setup and loop.
+//
+
+void setup() {
+    // Start Gravity.
+    gravity.Init();
+
+    // Clock handlers.
+    gravity.clock.AttachIntHandler(HandleIntClockTick);
+    gravity.clock.AttachExtHandler(HandleExtClockTick);
+
+    // Encoder rotate and press handlers.
+    gravity.encoder.AttachPressHandler(HandleEncoderPressed);
+    gravity.encoder.AttachRotateHandler(HandleRotate);
+    gravity.encoder.AttachPressRotateHandler(HandlePressedRotate);
+
+    // Button press handlers.
+    gravity.play_button.AttachPressHandler(HandlePlayPressed);
+}
+
+void loop() {
+    // Process change in state of inputs and outputs.
+    gravity.Process();
+
+    // Check if cv run or reset is active and read cv.
+    CheckRunReset(gravity.cv1, gravity.cv2);
+
+    if (app.refresh_screen) {
+        UpdateDisplay();
+    }
+}
+
+//
+// Firmware handlers for clocks.
+//
+
+void HandleIntClockTick(uint32_t tick) {
+    bool refresh = false;
+    for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+        app.channel[i].processClockTick(tick, gravity.outputs[i]);
+    }
+}
+
+void HandleExtClockTick() {
+    switch (app.selected_source) {
+        case Clock::SOURCE_INTERNAL:
+        case Clock::SOURCE_EXTERNAL_MIDI:
+            // Use EXT as Reset when not used for clock source.
+            ResetOutputs();
+            gravity.clock.Reset();
+            break;
+        default:
+            // Register EXT cv clock tick.
+            gravity.clock.Tick();
+    }
+    app.refresh_screen = true;
+}
+
+void CheckRunReset(AnalogInput& cv1, AnalogInput& cv2) {
+    // Clock Run
+    if (app.cv_run == 1 || app.cv_run == 2) {
+        const int val = (app.cv_run == 1) ? cv1.Read() : cv2.Read();
+        if (val > AnalogInput::GATE_THRESHOLD && gravity.clock.IsPaused()) {
+            gravity.clock.Start();
+            app.refresh_screen = true;
+        } else if (val < AnalogInput::GATE_THRESHOLD && !gravity.clock.IsPaused()) {
+            gravity.clock.Stop();
+            ResetOutputs();
+            app.refresh_screen = true;
+        }
+    }
+
+    // Clock Reset
+    if ((app.cv_reset == 1 && cv1.IsRisingEdge(AnalogInput::GATE_THRESHOLD)) ||
+        (app.cv_reset == 2 && cv2.IsRisingEdge(AnalogInput::GATE_THRESHOLD))) {
+        gravity.clock.Reset();
+    }
+}
+
+//
+// UI handlers for encoder and buttons.
+//
+
+void HandlePlayPressed() {
+}
+
+void HandleEncoderPressed() {
+}
+
+void HandleRotate(int val) {
+}
+
+void HandlePressedRotate(int val) {
+}
+
+// TODO: move to libGravity
+void ResetOutputs() {
+    for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+        gravity.outputs[i].Low();
+    }
+}

firmware/GridSeq/app_state.h

@@ -0,0 +1,38 @@
+/**
+ * @file app_state.h
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version 2.0.1
+ * @date 2025-07-04
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#ifndef APP_STATE_H
+#define APP_STATE_H
+
+#include <libGravity.h>
+
+#include "channel.h"
+
+// Global state for settings and app behavior.
+struct AppState {
+    int tempo = Clock::DEFAULT_TEMPO;
+    Clock::Source selected_source = Clock::SOURCE_INTERNAL;
+    Channel channel[Gravity::OUTPUT_COUNT];
+    byte selected_param = 0;
+    byte selected_channel = 0;    // 0=tempo, 1-6=output channel
+    byte cv_run = 0;
+    byte cv_reset = 0;
+    bool editing_param = false;
+    bool refresh_screen = true;
+};
+
+extern AppState app;
+
+static Channel& GetSelectedChannel() {
+    return app.channel[app.selected_channel - 1];
+}
+
+#endif  // APP_STATE_H

firmware/GridSeq/channel.h

@@ -0,0 +1,129 @@
+/**
+ * @file channel.h
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Grid Sequencer.
+ * @version 1.0.0
+ * @date 2025-08-12
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#ifndef CHANNEL_H
+#define CHANNEL_H
+
+#include <Arduino.h>
+#include <libGravity.h>
+
+#include "euclidean.h"
+
+// Enums for CV Mod destination
+enum CvDestination : uint8_t {
+    CV_DEST_NONE,
+    CV_DEST_MODE,
+    CV_DEST_LENGTH,
+    CV_DEST_DIV,
+    CV_DEST_PROB,
+    CV_DEST_DENSITY,
+    CV_DEST_LAST,
+};
+
+// Enums for GridSeq modes
+enum Mode : uint8_t {
+    MODE_SEQ,
+    MODE_EUCLIDEAN,
+    MODE_PATTERN,
+    MODE_LAST,
+};
+
+
+class Channel {
+   public:
+    Channel() {
+        Init();
+    }
+
+    void Init() {
+        base_probability = 100;
+
+        cv1_dest = CV_DEST_NONE;
+        cv2_dest = CV_DEST_NONE;
+    }
+
+    bool isCvModActive() const { return cv1_dest != CV_DEST_NONE || cv2_dest != CV_DEST_NONE; }
+
+    // Setters (Set the BASE value)
+
+    void setProbability(int prob) {
+        base_probability = constrain(prob, 0, 100);
+    }
+
+    void setCv1Dest(CvDestination dest) {
+        cv1_dest = dest;
+    }
+    void setCv2Dest(CvDestination dest) {
+        cv2_dest = dest;
+    }
+    CvDestination getCv1Dest() const { return cv1_dest; }
+    CvDestination getCv2Dest() const { return cv2_dest; }
+
+    // Getters (Get the BASE value for editing or cv modded value for display)
+    int getProbability() const { return base_probability; }
+
+    // Getters that calculate the value with CV modulation applied.
+    int getProbabilityWithMod(int cv1_val, int cv2_val) {
+        int prob_mod = _calculateMod(CV_DEST_PROB, cv1_val, cv2_val, -50, 50);
+        return constrain(base_probability + prob_mod, 0, 100);
+    }
+
+    void toggleMute() { mute = !mute; }
+
+    /**
+     * @brief Processes a clock tick and determines if the output should be high or low.
+     * Note: this method is called from an ISR and must be kept as simple as possible.
+     * @param tick The current clock tick count.
+     * @param output The output object to be modified.
+     */
+    void processClockTick(uint32_t tick, DigitalOutput& output) {
+        // Mute check
+        if (mute) {
+            output.Low();
+            return;
+        }
+
+        int cv1 = gravity.cv1.Read();
+        int cv2 = gravity.cv2.Read();
+        int cvmod_probability = getProbabilityWithMod(cv1, cv2);
+
+        // Duty cycle high check logic
+        if (!output.On()) {
+            // Step check
+            bool hit = cvmod_probability >= random(0, 100);
+            if (hit) {
+                output.Trigger();
+            }
+        }
+
+    }
+
+   private:
+    int _calculateMod(CvDestination dest, int cv1_val, int cv2_val, int min_range, int max_range) {
+        int mod1 = (cv1_dest == dest) ? map(cv1_val, -512, 512, min_range, max_range) : 0;
+        int mod2 = (cv2_dest == dest) ? map(cv2_val, -512, 512, min_range, max_range) : 0;
+        return mod1 + mod2;
+    }
+
+    // User-settable base values.
+    byte base_probability;
+
+    // CV mod configuration
+    CvDestination cv1_dest;
+    CvDestination cv2_dest;
+
+    // Mute channel flag
+    bool mute;
+
+    uint16_t _duty_pulses;
+};
+
+#endif  // CHANNEL_H

firmware/GridSeq/display.h

@@ -0,0 +1,93 @@
+/**
+ * @file display.h
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version 1.0.0
+ * @date 2025-07-04
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#ifndef DISPLAY_H
+#define DISPLAY_H
+
+#include <Arduino.h>
+
+#include "app_state.h"
+
+//
+// UI Display functions for drawing the UI to the OLED display.
+//
+
+/*
+ * Font: velvetscreen.bdf 9pt
+ * https://stncrn.github.io/u8g2-unifont-helper/
+ * "%/0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+ */
+const uint8_t TEXT_FONT[437] U8G2_FONT_SECTION("velvetscreen") PROGMEM =
+    "\64\0\2\2\3\3\2\3\4\5\5\0\0\5\0\5\0\0\221\0\0\1\230 \4\200\134%\11\255tT"
+    "R\271RI(\6\252\334T\31)\7\252\134bJ\12+\7\233\345\322J\0,\5\221T\4-\5\213"
+    "f\6.\5\211T\2/\6\244\354c\33\60\10\254\354T\64\223\2\61\7\353\354\222\254\6\62\11\254l"
+    "\66J*\217\0\63\11\254l\66J\32\215\4\64\10\254l\242\34\272\0\65\11\254l\206\336h$\0\66"
+    "\11\254\354T^\61)\0\67\10\254lF\216u\4\70\11\254\354TL*&\5\71\11\254\354TL;"
+    ")\0:\6\231UR\0A\10\254\354T\34S\6B\11\254lV\34)\216\4C\11\254\354T\324\61"
+    ")\0D\10\254lV\64G\2E\10\254l\206\36z\4F\10\254l\206^\71\3G\11\254\354TN"
+    "\63)\0H\10\254l\242\34S\6I\6\251T\206\0J\10\254\354k\231\24\0K\11\254l\242J\62"
+    "\225\1L\7\254lr{\4M\11\255t\362ZI\353\0N\11\255t\362TI\356\0O\10\254\354T"
+    "\64\223\2P\11\254lV\34)g\0Q\10\254\354T\264b\12R\10\254lV\34\251\31S\11\254\354"
+    "FF\32\215\4T\7\253dVl\1U\10\254l\242\63)\0V\11\255t\262Ne\312\21W\12\255"
+    "t\262J*\251.\0X\11\254l\242L*\312\0Y\12\255tr\252\63\312(\2Z\7\253df*"
+    "\7p\10\255\364V\266\323\2q\7\255\364\216\257\5r\10\253d\242\32*\2t\6\255t\376#w\11"
+    "\255\364V\245FN\13x\6\233dR\7\0\0\0\4\377\377\0";
+
+/*
+ * Font: STK-L.bdf 36pt
+ * https://stncrn.github.io/u8g2-unifont-helper/
+ * "%/0123456789ABCDEFILNORSTUVXx"
+ */
+const uint8_t LARGE_FONT[766] U8G2_FONT_SECTION("stk-l") PROGMEM =
+    "\35\0\4\4\4\5\3\1\6\20\30\0\0\27\0\0\0\1\77\0\0\2\341%'\17;\226\261\245FL"
+    "\64B\214\30\22\223\220)Bj\10Q\232\214\42R\206\310\210\21d\304\30\32a\254\304\270!\0/\14"
+    "\272\272\275\311H\321g\343\306\1\60\37|\373\35CJT\20:fW\207\320\210\60\42\304\204\30D\247"
+    "\214\331\354\20\11%\212\314\0\61\24z\275\245a\244\12\231\71\63b\214\220q\363\377(E\6\62\33|"
+    "\373\35ShT\20:fl\344\14\211\231\301\306T\71\202#g\371\340\201\1\63\34|\373\35ShT"
+    "\20:fl\344@r\264\263\222\344,\215\35\42\241\6\225\31\0\64 |\373-!\203\206\214!\62\204"
+    "\314\220A#\10\215\30\65b\324\210Q\306\354\354\1\213\225\363\1\65\32|\373\15\25[\214\234/\10)"
+    "Y\61j\350\310Y\32;DB\15*\63\0\66\33}\33\236SiV\14;gt^\230Y\302\202\324"
+    "\71\273;EbM\252\63\0\67\23|\373\205\25\17R\316\207\344\350p\312\201#\347\35\0\70 |\373"
+    "\35ShT\20:f\331!\22D\310 :\205\206\10\11B\307\354\354\20\11\65\250\314\0\71\32|\373"
+    "\35ShT\20:fg\207H,Q\223r\276\30DB\15*\63\0A\26}\33\246r\247\322P\62"
+    "j\310\250\21\343\354\335\203\357\354w\3B$}\33\206Dj\226\214\42\61l\304\260\21\303F\14\33\61"
+    "\212\304\222MF\221\30v\316\236=\10\301b\11\0C\27}\33\236Si\226\20Bft\376O\211\215"
+    " Db\215\42$\0D\33}\33\206Dj\226\214\32\62l\304\260\21\343\354\177vl\304(\22K\324"
+    "$\2E\22|\373\205\17R\316KD\30\215\234_>x`\0F\20|\373\205\17R\316\227i\262\31"
+    "\71\377\22\0I\7s\333\204\77HL\15{\333\205\201\363\377\77|\360`\0N$}\33\6\201\346\314"
+    "\35;\206\12U\242D&\306\230\30cd\210\221!fF\230\31a(+\314\256\63\67\0O\26}\33"
+    "\236Si\226\214\32\61\316\376\277\33\61j\310\232Tg\0R\61\216;\6Ek\230\14#\61n\304\270"
+    "\21\343F\214\33\61n\304\60\22\243\210\60Q\224j\310\260\61\243\306\20\232\325\230QD\206\221\30\67b"
+    "\334\301\1S\42\216;\236c\211\226\220\42\61n\304\270\21c\307R\232,[\262\203\307\216\65h\16\25"
+    "\21&\253\320\0T\15}\33\206\17R\15\235\377\377\25\0U\21|\373\205a\366\377\237\215\30\64D\15"
+    "*\63\0V\26\177\371\205\221\366\377\313\21\343\206\220\42C\25\11r'\313\16\3X)~;\206\201\6"
+    "\217\221\30\66\204\20\31\42\244\206\14Cg\320$Q\222\6\315!\33\62\212\10\31BD\206\215 v\320"
+    "\302\1x\24\312\272\205A\206\216\220@c\212\224\31$S\14\262h\0\0\0\0\4\377\377\0";
+
+#define play_icon_width 14
+#define play_icon_height 14
+static const unsigned char play_icon[28] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x7C, 0x00, 0xFC, 0x00, 0xFC, 0x03,
+    0xFC, 0x0F, 0xFC, 0x0F, 0xFC, 0x03, 0xFC, 0x00, 0x7C, 0x00, 0x3C, 0x00,
+    0x00, 0x00, 0x00, 0x00};
+static const unsigned char pause_icon[28] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E,
+    0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E,
+    0x38, 0x0E, 0x00, 0x00};
+
+void UpdateDisplay() {
+    app.refresh_screen = false;
+    gravity.display.firstPage();
+    do {
+    } while (gravity.display.nextPage());
+}
+
+#endif  // DISPLAY_H

firmware/GridSeq/euclidean.h

@@ -0,0 +1,100 @@
+/**
+ * @file euclidean.h
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version 2.0.1
+ * @date 2025-07-04
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#ifndef EUCLIDEAN_H
+#define EUCLIDEAN_H
+
+#define MAX_PATTERN_LEN 32
+
+struct EuclideanState {
+    uint8_t steps;
+    uint8_t hits;
+    uint8_t offset;
+    uint8_t padding;
+};
+
+const EuclideanState DEFAULT_PATTERN = {1, 1};
+
+class Euclidean {
+   public:
+    Euclidean() {}
+    ~Euclidean() {}
+
+    enum Step : uint8_t {
+        REST,
+        HIT,
+    };
+
+    void Init(EuclideanState state) {
+        steps_ = constrain(state.steps, 1, MAX_PATTERN_LEN);
+        hits_ = constrain(state.hits, 1, steps_);
+        updatePattern();
+    }
+
+    EuclideanState GetState() const { return {steps_, hits_}; }
+
+    Step GetCurrentStep(byte i) {
+        if (i >= MAX_PATTERN_LEN) return REST;
+        return (pattern_bitmap_ & (1UL << i)) ? HIT : REST;
+    }
+
+    void SetSteps(int steps) {
+        steps_ = constrain(steps, 1, MAX_PATTERN_LEN);
+        hits_ = min(hits_, steps_);
+        updatePattern();
+    }
+
+    void SetHits(int hits) {
+        hits_ = constrain(hits, 1, steps_);
+        updatePattern();
+    }
+
+    void Reset() { step_index_ = 0; }
+
+    uint8_t GetSteps() const { return steps_; }
+    uint8_t GetHits() const { return hits_; }
+    uint8_t GetStepIndex() const { return step_index_; }
+
+    Step NextStep() {
+        if (steps_ == 0) return REST;
+
+        Step value = GetCurrentStep(step_index_);
+        step_index_ = (step_index_ < steps_ - 1) ? step_index_ + 1 : 0;
+        return value;
+    }
+
+   private:
+    uint8_t steps_ = 0;
+    uint8_t hits_ = 0;
+    volatile uint8_t step_index_ = 0;
+    uint32_t pattern_bitmap_ = 0;
+
+    // Update the euclidean rhythm pattern using bitmap
+    void updatePattern() {
+        pattern_bitmap_ = 0;  // Clear the bitmap
+
+        if (steps_ == 0) return;
+
+        byte bucket = 0;
+        // Set the first bit (index 0) if it's a HIT
+        pattern_bitmap_ |= (1UL << 0);
+
+        for (int i = 1; i < steps_; i++) {
+            bucket += hits_;
+            if (bucket >= steps_) {
+                bucket -= steps_;
+                pattern_bitmap_ |= (1UL << i);
+            }
+        }
+    }
+};
+
+#endif

library.properties

@@ -1,5 +1,5 @@
 name=libGravity
-version=2.0.0beta3
+version=2.0.0
 author=Adam Wonak
 maintainer=awonak <github.com/awonak>
 sentence=Hardware abstraction library for Sitka Instruments Gravity eurorack module

src/clock.h

@@ -35,7 +35,6 @@ class Clock {
         SOURCE_INTERNAL,
         SOURCE_EXTERNAL_PPQN_24,
         SOURCE_EXTERNAL_PPQN_4,
-        SOURCE_EXTERNAL_PPQN_2,
         SOURCE_EXTERNAL_PPQN_1,
         SOURCE_EXTERNAL_MIDI,
         SOURCE_LAST,
@@ -43,9 +42,9 @@ class Clock {
 
     enum Pulse {
         PULSE_NONE,
-        PULSE_PPQN_1,
-        PULSE_PPQN_4,
         PULSE_PPQN_24,
+        PULSE_PPQN_4,
+        PULSE_PPQN_1,
         PULSE_LAST,
     };
 
@@ -98,10 +97,6 @@ class Clock {
                 uClock.setClockMode(uClock.EXTERNAL_CLOCK);
                 uClock.setInputPPQN(uClock.PPQN_4);
                 break;
-            case SOURCE_EXTERNAL_PPQN_2:
-                uClock.setClockMode(uClock.EXTERNAL_CLOCK);
-                uClock.setInputPPQN(uClock.PPQN_2);
-                break;
             case SOURCE_EXTERNAL_PPQN_1:
                 uClock.setClockMode(uClock.EXTERNAL_CLOCK);
                 uClock.setInputPPQN(uClock.PPQN_1);