bump version

Refactor the save / load state use of disabling interrupts by wrapping all private methods from inside the public method. This ensures we will not have a race condition if an interrupt is called in between the private method calls.

firmware/Euclidean/Euclidean.ino

@@ -0,0 +1,417 @@
+/**
+ * @file Gravity.ino
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version v2.0.1beta1 - February 2026 awonak
+ * @date 2026-02-21
+ *
+ * @copyright MIT - (c) 2026 - Adam Wonak - adam.wonak@gmail.com
+ *
+ * This version of Gravity firmware is a full rewrite that leverages the
+ * libGravity hardware abstraction library. The goal of this project was to
+ * create an open source friendly version of the firmware that makes it easy
+ * for users/developers to modify and create their own original alt firmware
+ * implementations.
+ *
+ * The libGravity library represents wrappers around the
+ * hardware peripherials to make it easy to interact with and add behavior
+ * to them. The library tries not to make any assumptions about what the
+ * firmware can or should do.
+ *
+ * The Gravity firmware is a slightly different implementation of the original
+ * firmware. There are a few notable changes; the internal clock operates at
+ * 96 PPQN instead of the original 24 PPQN, which allows for more granular
+ * quantization of features like duty cycle (pulse width) or offset.
+ * Additionally, this firmware replaces the sequencer with a Euclidean Rhythm
+ * generator.
+ *
+ * ENCODER:
+ *      Press: change between selecting a parameter and editing the parameter.
+ *      Hold & Rotate: change current selected output channel.
+ *
+ * BTN1:
+ *      Play/pause - start or stop the internal clock.
+ *
+ * BTN2:
+ *      Shift - hold and rotate encoder to change current selected output
+ * channel.
+ *
+ * EXT:
+ *      External clock input. When Gravity is set to INTERNAL or MIDI clock
+ *      source, this input is used to reset clocks.
+ *
+ * CV1:
+ *      External analog input used to provide modulation to any channel
+ * parameter.
+ *
+ * CV2:
+ *      External analog input used to provide modulation to any channel
+ * parameter.
+ *
+ */
+
+#include <libGravity.h>
+
+#include "app_state.h"
+#include "channel.h"
+#include "display.h"
+#include "save_state.h"
+
+AppState app;
+StateManager stateManager;
+
+//
+// Arduino setup and loop.
+//
+
+void setup() {
+  // Start Gravity.
+  gravity.Init();
+
+  // Show bootsplash when initializing firmware.
+  Bootsplash();
+  delay(2000);
+
+  // Initialize the state manager. This will load settings from EEPROM
+  stateManager.initialize(app);
+  InitGravity(app);
+
+  // Clock handlers.
+  gravity.clock.AttachIntHandler(HandleIntClockTick);
+  gravity.clock.AttachExtHandler(HandleExtClockTick);
+
+  // Encoder rotate and press handlers.
+  gravity.encoder.AttachPressHandler(HandleEncoderPressed);
+  gravity.encoder.AttachRotateHandler(HandleRotate);
+  gravity.encoder.AttachPressRotateHandler(HandlePressedRotate);
+
+  // Button press handlers.
+  gravity.play_button.AttachPressHandler(HandlePlayPressed);
+}
+
+void loop() {
+  // Process change in state of inputs and outputs.
+  gravity.Process();
+
+  // Read CVs and call the update function for each channel.
+  int cv1 = gravity.cv1.Read();
+  int cv2 = gravity.cv2.Read();
+
+  for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+    auto &ch = app.channel[i];
+    // Only apply CV to the channel when the current channel has cv
+    // mod configured.
+    if (ch.isCvModActive()) {
+      ch.applyCvMod(cv1, cv2);
+    }
+  }
+
+  // Clock Run
+  if (app.cv_run == 1 || app.cv_run == 2) {
+    auto &cv = app.cv_run == 1 ? gravity.cv1 : gravity.cv2;
+    int val = cv.Read();
+    if (val > AnalogInput::GATE_THRESHOLD && gravity.clock.IsPaused()) {
+      gravity.clock.Start();
+      app.refresh_screen = true;
+    } else if (val < AnalogInput::GATE_THRESHOLD && !gravity.clock.IsPaused()) {
+      gravity.clock.Stop();
+      ResetOutputs();
+      app.refresh_screen = true;
+    }
+  }
+
+  // Clock Reset
+  if ((app.cv_reset == 1 &&
+       gravity.cv1.IsRisingEdge(AnalogInput::GATE_THRESHOLD)) ||
+      (app.cv_reset == 2 &&
+       gravity.cv2.IsRisingEdge(AnalogInput::GATE_THRESHOLD))) {
+    gravity.clock.Reset();
+  }
+
+  // Check for dirty state eligible to be saved.
+  stateManager.update(app);
+
+  if (app.refresh_screen) {
+    UpdateDisplay();
+  }
+}
+
+//
+// Firmware handlers for clocks.
+//
+
+void HandleIntClockTick(uint32_t tick) {
+  bool refresh = false;
+  for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+    app.channel[i].processClockTick(tick, gravity.outputs[i]);
+
+    if (app.channel[i].isCvModActive()) {
+      refresh = true;
+    }
+  }
+
+  // Pulse Out gate
+  if (app.selected_pulse != Clock::PULSE_NONE) {
+    int clock_index;
+    switch (app.selected_pulse) {
+    case Clock::PULSE_PPQN_24:
+      clock_index = PULSE_PPQN_24_CLOCK_MOD_INDEX;
+      break;
+    case Clock::PULSE_PPQN_4:
+      clock_index = PULSE_PPQN_4_CLOCK_MOD_INDEX;
+      break;
+    case Clock::PULSE_PPQN_1:
+      clock_index = PULSE_PPQN_1_CLOCK_MOD_INDEX;
+      break;
+    }
+
+    const uint16_t pulse_high_ticks =
+        pgm_read_word_near(&CLOCK_MOD_PULSES[clock_index]);
+    const uint32_t pulse_low_ticks = tick + max((pulse_high_ticks / 2), 1L);
+
+    if (tick % pulse_high_ticks == 0) {
+      gravity.pulse.High();
+    } else if (pulse_low_ticks % pulse_high_ticks == 0) {
+      gravity.pulse.Low();
+    }
+  }
+
+  if (!app.editing_param) {
+    app.refresh_screen |= refresh;
+  }
+}
+
+void HandleExtClockTick() {
+  switch (app.selected_source) {
+  case Clock::SOURCE_INTERNAL:
+  case Clock::SOURCE_EXTERNAL_MIDI:
+    // Use EXT as Reset when not used for clock source.
+    ResetOutputs();
+    gravity.clock.Reset();
+    break;
+  default:
+    // Register EXT cv clock tick.
+    gravity.clock.Tick();
+  }
+  app.refresh_screen = true;
+}
+
+//
+// UI handlers for encoder and buttons.
+//
+
+void HandlePlayPressed() {
+  // Check if SHIFT is pressed to mute all/current channel.
+  if (gravity.shift_button.On()) {
+    if (app.selected_channel == 0) {
+      // Mute all channels
+      for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+        app.channel[i].toggleMute();
+      }
+    } else {
+      // Mute selected channel
+      auto &ch = GetSelectedChannel();
+      ch.toggleMute();
+    }
+    return;
+  }
+
+  gravity.clock.IsPaused() ? gravity.clock.Start() : gravity.clock.Stop();
+  ResetOutputs();
+  app.refresh_screen = true;
+}
+
+void HandleEncoderPressed() {
+  // Check if leaving editing mode should apply a selection.
+  if (app.editing_param) {
+    if (app.selected_channel == 0) { // main page
+      // TODO: rewrite as switch
+      if (app.selected_param == PARAM_MAIN_ENCODER_DIR) {
+        app.encoder_reversed = app.selected_sub_param == 1;
+        gravity.encoder.SetReverseDirection(app.encoder_reversed);
+      }
+      if (app.selected_param == PARAM_MAIN_ROTATE_DISP) {
+        app.rotate_display = app.selected_sub_param == 1;
+        gravity.display.setFlipMode(app.rotate_display ? 1 : 0);
+      }
+      if (app.selected_param == PARAM_MAIN_SAVE_DATA) {
+        if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
+          app.selected_save_slot = app.selected_sub_param;
+          stateManager.saveData(app);
+        }
+      }
+      if (app.selected_param == PARAM_MAIN_LOAD_DATA) {
+        if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
+          app.selected_save_slot = app.selected_sub_param;
+          // Load pattern data into app state.
+          stateManager.loadData(app, app.selected_save_slot);
+          // Load global performance settings if they have changed.
+          if (gravity.clock.Tempo() != app.tempo) {
+            gravity.clock.SetTempo(app.tempo);
+          }
+          // Load global settings only if clock is not active.
+          if (gravity.clock.IsPaused()) {
+            InitGravity(app);
+          }
+        }
+      }
+      if (app.selected_param == PARAM_MAIN_RESET_STATE) {
+        if (app.selected_sub_param == 0) { // Reset
+          stateManager.reset(app);
+          InitGravity(app);
+        }
+      }
+      if (app.selected_param == PARAM_MAIN_FACTORY_RESET) {
+        if (app.selected_sub_param == 0) { // Erase
+          // Show bootsplash during slow erase operation.
+          Bootsplash();
+          stateManager.factoryReset(app);
+          InitGravity(app);
+        }
+      }
+    }
+    // Only mark dirty and reset selected_sub_param when leaving editing mode.
+    stateManager.markDirty();
+    app.selected_sub_param = 0;
+  }
+
+  app.editing_param = !app.editing_param;
+  app.refresh_screen = true;
+}
+
+void HandleRotate(int val) {
+  // Shift & Rotate check
+  if (gravity.shift_button.On()) {
+    HandlePressedRotate(val);
+    return;
+  }
+
+  if (!app.editing_param) {
+    // Navigation Mode
+    const int max_param =
+        (app.selected_channel == 0) ? PARAM_MAIN_LAST : PARAM_CH_LAST;
+    updateSelection(app.selected_param, val, max_param);
+  } else {
+    // Editing Mode
+    if (app.selected_channel == 0) {
+      editMainParameter(val);
+    } else {
+      editChannelParameter(val);
+    }
+  }
+  app.refresh_screen = true;
+}
+
+void HandlePressedRotate(int val) {
+  updateSelection(app.selected_channel, val, Gravity::OUTPUT_COUNT + 1);
+  app.selected_param = 0;
+  stateManager.markDirty();
+  app.refresh_screen = true;
+}
+
+void editMainParameter(int val) {
+  switch (static_cast<ParamsMainPage>(app.selected_param)) {
+  case PARAM_MAIN_TEMPO:
+    if (gravity.clock.ExternalSource()) {
+      break;
+    }
+    gravity.clock.SetTempo(gravity.clock.Tempo() + val);
+    app.tempo = gravity.clock.Tempo();
+    break;
+  case PARAM_MAIN_RUN:
+    updateSelection(app.selected_sub_param, val, 3);
+    app.cv_run = app.selected_sub_param;
+    break;
+  case PARAM_MAIN_RESET:
+    updateSelection(app.selected_sub_param, val, 3);
+    app.cv_reset = app.selected_sub_param;
+    break;
+  case PARAM_MAIN_SOURCE: {
+    byte source = static_cast<int>(app.selected_source);
+    updateSelection(source, val, Clock::SOURCE_LAST);
+    app.selected_source = static_cast<Clock::Source>(source);
+    gravity.clock.SetSource(app.selected_source);
+    break;
+  }
+  case PARAM_MAIN_PULSE: {
+    byte pulse = static_cast<int>(app.selected_pulse);
+    updateSelection(pulse, val, Clock::PULSE_LAST);
+    app.selected_pulse = static_cast<Clock::Pulse>(pulse);
+    if (app.selected_pulse == Clock::PULSE_NONE) {
+      gravity.pulse.Low();
+    }
+    break;
+  }
+  // These changes are applied upon encoder button press.
+  case PARAM_MAIN_ENCODER_DIR:
+    updateSelection(app.selected_sub_param, val, 2);
+    break;
+  case PARAM_MAIN_ROTATE_DISP:
+    updateSelection(app.selected_sub_param, val, 2);
+    break;
+  case PARAM_MAIN_SAVE_DATA:
+  case PARAM_MAIN_LOAD_DATA:
+    updateSelection(app.selected_sub_param, val,
+                    StateManager::MAX_SAVE_SLOTS + 1);
+    break;
+  case PARAM_MAIN_RESET_STATE:
+    updateSelection(app.selected_sub_param, val, 2);
+    break;
+  case PARAM_MAIN_FACTORY_RESET:
+    updateSelection(app.selected_sub_param, val, 2);
+    break;
+  }
+}
+
+void editChannelParameter(int val) {
+  auto &ch = GetSelectedChannel();
+  switch (app.selected_param) {
+  case PARAM_CH_MOD:
+    ch.setClockMod(ch.getClockModIndex() + val);
+    break;
+  case PARAM_CH_EUC_STEPS:
+    ch.setSteps(ch.getSteps() + val);
+    break;
+  case PARAM_CH_EUC_HITS:
+    ch.setHits(ch.getHits() + val);
+    break;
+  case PARAM_CH_CV1_DEST: {
+    byte dest = static_cast<int>(ch.getCv1Dest());
+    updateSelection(dest, val, CV_DEST_LAST);
+    ch.setCv1Dest(static_cast<CvDestination>(dest));
+    break;
+  }
+  case PARAM_CH_CV2_DEST: {
+    byte dest = static_cast<int>(ch.getCv2Dest());
+    updateSelection(dest, val, CV_DEST_LAST);
+    ch.setCv2Dest(static_cast<CvDestination>(dest));
+    break;
+  }
+  }
+}
+
+// Changes the param by the value provided.
+void updateSelection(byte &param, int change, int maxValue) {
+  // Do not apply acceleration if max value is less than 25.
+  if (maxValue < 25) {
+    change = change > 0 ? 1 : -1;
+  }
+  param = constrain(param + change, 0, maxValue - 1);
+}
+
+//
+// App Helper functions.
+//
+
+void InitGravity(AppState &app) {
+  gravity.clock.SetTempo(app.tempo);
+  gravity.clock.SetSource(app.selected_source);
+  gravity.encoder.SetReverseDirection(app.encoder_reversed);
+  gravity.display.setFlipMode(app.rotate_display ? 1 : 0);
+}
+
+void ResetOutputs() {
+  for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+    gravity.outputs[i].Low();
+  }
+}

firmware/Euclidean/app_state.h

@@ -0,0 +1,44 @@
+/**
+ * @file app_state.h
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version 2.0.1
+ * @date 2025-07-04
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#ifndef APP_STATE_H
+#define APP_STATE_H
+
+#include <libGravity.h>
+
+#include "channel.h"
+
+// Global state for settings and app behavior.
+struct AppState {
+  int tempo = Clock::DEFAULT_TEMPO;
+  Channel channel[Gravity::OUTPUT_COUNT];
+  byte selected_param = 0;
+  byte selected_sub_param = 0; // Temporary value for editing params.
+  byte selected_channel = 0;   // 0=tempo, 1-6=output channel
+  byte selected_swing = 0;
+  byte selected_save_slot = 0; // The currently active save slot.
+  Clock::Source selected_source = Clock::SOURCE_INTERNAL;
+  Clock::Pulse selected_pulse = Clock::PULSE_PPQN_24;
+  byte cv_run = 0;
+  byte cv_reset = 0;
+  bool editing_param = false;
+  bool encoder_reversed = false;
+  bool rotate_display = false;
+  bool refresh_screen = true;
+};
+
+extern AppState app;
+
+static Channel &GetSelectedChannel() {
+  return app.channel[app.selected_channel - 1];
+}
+
+#endif // APP_STATE_H

firmware/Euclidean/channel.h

@@ -0,0 +1,247 @@
+/**
+ * @file channel.h
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version 2.0.1
+ * @date 2025-07-04
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#ifndef CHANNEL_H
+#define CHANNEL_H
+
+#include <Arduino.h>
+#include <libGravity.h>
+
+#include "euclidean.h"
+
+// Enums for CV Mod destination
+enum CvDestination : uint8_t {
+  CV_DEST_NONE,
+  CV_DEST_MOD,
+  CV_DEST_EUC_STEPS,
+  CV_DEST_EUC_HITS,
+  CV_DEST_LAST,
+};
+
+static const byte MOD_CHOICE_SIZE = 25;
+
+// Negative numbers are multipliers, positive are divisors.
+static const int CLOCK_MOD[MOD_CHOICE_SIZE] PROGMEM = {
+    // Divisors
+    128, 64, 32, 24, 16, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2,
+    // Internal Clock Unity (quarter note)
+    1,
+    // Multipliers
+    -2, -3, -4, -6, -8, -12, -16, -24};
+
+// This represents the number of clock pulses for a 96 PPQN clock source
+// that match the above div/mult mods.
+static const int CLOCK_MOD_PULSES[MOD_CHOICE_SIZE] PROGMEM = {
+    // Divisor Pulses (96 * X)
+    12288, 6144, 3072, 2304, 1536, 1152, 1056, 960, 864, 768, 672, 576, 480,
+    384, 288, 192,
+    // Internal Clock Pulses
+    96,
+    // Multiplier Pulses (96 / X)
+    48, 32, 24, 16, 12, 8, 6, 4};
+
+static const byte DEFAULT_CLOCK_MOD_INDEX = 16; // x1 or 96 PPQN.
+
+static const byte PULSE_PPQN_24_CLOCK_MOD_INDEX = MOD_CHOICE_SIZE - 1;
+static const byte PULSE_PPQN_4_CLOCK_MOD_INDEX = MOD_CHOICE_SIZE - 6;
+static const byte PULSE_PPQN_1_CLOCK_MOD_INDEX = MOD_CHOICE_SIZE - 9;
+
+class Channel {
+public:
+  Channel() { Init(); }
+
+  void Init() {
+    // Reset base values to their defaults
+    base_clock_mod_index = DEFAULT_CLOCK_MOD_INDEX;
+    base_euc_steps = 1;
+    base_euc_hits = 1;
+
+    cvmod_clock_mod_index = base_clock_mod_index;
+
+    cv1_dest = CV_DEST_NONE;
+    cv2_dest = CV_DEST_NONE;
+
+    pattern.Init(DEFAULT_PATTERN);
+
+    // Calcule the clock mod pulses on init.
+    _recalculatePulses();
+  }
+
+  // Setters (Set the BASE value)
+
+  void setClockMod(int index) {
+    base_clock_mod_index = constrain(index, 0, MOD_CHOICE_SIZE - 1);
+    if (!isCvModActive()) {
+      cvmod_clock_mod_index = base_clock_mod_index;
+      _recalculatePulses();
+    }
+  }
+
+  // Euclidean
+  void setSteps(int val) {
+    base_euc_steps = constrain(val, 1, MAX_PATTERN_LEN);
+    if (cv1_dest != CV_DEST_EUC_STEPS && cv2_dest != CV_DEST_EUC_STEPS) {
+      pattern.SetSteps(val);
+    }
+  }
+  void setHits(int val) {
+    base_euc_hits = constrain(val, 1, base_euc_steps);
+    if (cv1_dest != CV_DEST_EUC_HITS && cv2_dest != CV_DEST_EUC_HITS) {
+      pattern.SetHits(val);
+    }
+  }
+
+  void setCv1Dest(CvDestination dest) { cv1_dest = dest; }
+  void setCv2Dest(CvDestination dest) { cv2_dest = dest; }
+  CvDestination getCv1Dest() const { return cv1_dest; }
+  CvDestination getCv2Dest() const { return cv2_dest; }
+
+  // Getters (Get the BASE value for editing or cv modded value for display)
+
+  int getClockMod(bool withCvMod = false) const {
+    return pgm_read_word_near(&CLOCK_MOD[getClockModIndex(withCvMod)]);
+  }
+  int getClockModIndex(bool withCvMod = false) const {
+    return withCvMod ? cvmod_clock_mod_index : base_clock_mod_index;
+  }
+  bool isCvModActive() const {
+    return cv1_dest != CV_DEST_NONE || cv2_dest != CV_DEST_NONE;
+  }
+
+  byte getSteps(bool withCvMod = false) const {
+    return withCvMod ? pattern.GetSteps() : base_euc_steps;
+  }
+  byte getHits(bool withCvMod = false) const {
+    return withCvMod ? pattern.GetHits() : base_euc_hits;
+  }
+
+  void toggleMute() { mute = !mute; }
+
+  /**
+   * @brief Processes a clock tick and determines if the output should be high
+   * or low. Note: this method is called from an ISR and must be kept as simple
+   * as possible.
+   * @param tick The current clock tick count.
+   * @param output The output object to be modified.
+   */
+  void processClockTick(uint32_t tick, DigitalOutput &output) {
+    // Mute check
+    if (mute) {
+      output.Low();
+      return;
+    }
+
+    const uint16_t mod_pulses =
+        pgm_read_word_near(&CLOCK_MOD_PULSES[cvmod_clock_mod_index]);
+
+    // Euclidian rhythm cycle check
+    if (!output.On()) {
+      // Step check
+      if (tick % mod_pulses == 0) {
+        bool hit = true;
+        // Euclidean rhythm hit check
+        switch (pattern.NextStep()) {
+        case Pattern::REST:
+          hit = false;
+          break;
+        case Pattern::HIT:
+          hit &= true;
+          break;
+        }
+        if (hit) {
+          output.High();
+        }
+      }
+    }
+
+    // Output low check. Half pulse width.
+    const uint32_t duty_cycle_end_tick = tick + _duty_pulses;
+    if (duty_cycle_end_tick % mod_pulses == 0) {
+      output.Low();
+    }
+  }
+  /**
+   * @brief Calculate and store cv modded values using bipolar mapping.
+   * Default to base value if not the current CV destination.
+   *
+   * @param cv1_val analog input reading for cv1
+   * @param cv2_val analog input reading for cv2
+   *
+   */
+  void applyCvMod(int cv1_val, int cv2_val) {
+    // Note: This is optimized for cpu performance. This method is called
+    // from the main loop and stores the cv mod values. This reduces CPU
+    // cycles inside the internal clock interrupt, which is preferrable.
+    // However, if RAM usage grows too much, we have an opportunity to
+    // refactor this to store just the CV read values, and calculate the
+    // cv mod value per channel inside the getter methods by passing cv
+    // values. This would reduce RAM usage, but would introduce a
+    // significant CPU cost, which may have undesirable performance issues.
+    if (!isCvModActive()) {
+      cvmod_clock_mod_index = base_clock_mod_index;
+      return;
+    }
+
+    int dest_mod = _calculateMod(CV_DEST_MOD, cv1_val, cv2_val,
+                                 -(MOD_CHOICE_SIZE / 2), MOD_CHOICE_SIZE / 2);
+    cvmod_clock_mod_index = constrain(base_clock_mod_index + dest_mod, 0, 100);
+
+    int step_mod =
+        _calculateMod(CV_DEST_EUC_STEPS, cv1_val, cv2_val, 0, MAX_PATTERN_LEN);
+    pattern.SetSteps(base_euc_steps + step_mod);
+
+    int hit_mod = _calculateMod(CV_DEST_EUC_HITS, cv1_val, cv2_val, 0,
+                                pattern.GetSteps());
+    pattern.SetHits(base_euc_hits + hit_mod);
+
+    // After all cvmod values are updated, recalculate clock pulse modifiers.
+    _recalculatePulses();
+  }
+
+private:
+  int _calculateMod(CvDestination dest, int cv1_val, int cv2_val, int min_range,
+                    int max_range) {
+    int mod1 =
+        (cv1_dest == dest) ? map(cv1_val, -512, 512, min_range, max_range) : 0;
+    int mod2 =
+        (cv2_dest == dest) ? map(cv2_val, -512, 512, min_range, max_range) : 0;
+    return mod1 + mod2;
+  }
+
+  void _recalculatePulses() {
+    const uint16_t mod_pulses =
+        pgm_read_word_near(&CLOCK_MOD_PULSES[cvmod_clock_mod_index]);
+    _duty_pulses = max((long)(mod_pulses / 2L), 1L);
+  }
+
+  // User-settable base values.
+  byte base_clock_mod_index;
+  byte base_euc_steps;
+  byte base_euc_hits;
+
+  // Base value with cv mod applied.
+  byte cvmod_clock_mod_index;
+
+  // CV mod configuration
+  CvDestination cv1_dest;
+  CvDestination cv2_dest;
+
+  // Euclidean pattern
+  Pattern pattern;
+
+  // Mute channel flag
+  bool mute;
+
+  // Pre-calculated pulse values for ISR performance
+  uint16_t _duty_pulses;
+};
+
+#endif // CHANNEL_H

firmware/Euclidean/display.h

@@ -0,0 +1,520 @@
+/**
+ * @file display.h
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version 2.0.1
+ * @date 2025-07-04
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#ifndef DISPLAY_H
+#define DISPLAY_H
+
+#include <Arduino.h>
+
+#include "app_state.h"
+#include "save_state.h"
+
+//
+// UI Display functions for drawing the UI to the OLED display.
+//
+
+/*
+ * Font: velvetscreen.bdf 9pt
+ * https://stncrn.github.io/u8g2-unifont-helper/
+ * "%/0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+ */
+const uint8_t TEXT_FONT[437] U8G2_FONT_SECTION("velvetscreen") PROGMEM =
+    "\64\0\2\2\3\3\2\3\4\5\5\0\0\5\0\5\0\0\221\0\0\1\230 \4\200\134%\11\255tT"
+    "R\271RI(\6\252\334T\31)\7\252\134bJ\12+\7\233\345\322J\0,\5\221T\4-\5\213"
+    "f\6.\5\211T\2/"
+    "\6\244\354c\33\60\10\254\354T\64\223\2\61\7\353\354\222\254\6\62\11\254l"
+    "\66J*"
+    "\217\0\63\11\254l\66J\32\215\4\64\10\254l\242\34\272\0\65\11\254l\206\336h"
+    "$\0\66"
+    "\11\254\354T^\61)\0\67\10\254lF\216u\4\70\11\254\354TL*&"
+    "\5\71\11\254\354TL;"
+    ")\0:\6\231UR\0A\10\254\354T\34S\6B\11\254lV\34)\216\4C\11\254\354T\324\61"
+    ")\0D\10\254lV\64G\2E\10\254l\206\36z\4F\10\254l\206^\71\3G\11\254\354TN"
+    "\63)"
+    "\0H\10\254l\242\34S\6I\6\251T\206\0J\10\254\354k\231\24\0K\11\254l\242J\62"
+    "\225\1L\7\254lr{\4M\11\255t\362ZI\353\0N\11\255t\362TI\356\0O\10\254\354T"
+    "\64\223\2P\11\254lV\34)"
+    "g\0Q\10\254\354T\264b\12R\10\254lV\34\251\31S\11\254\354"
+    "FF\32\215\4T\7\253dVl\1U\10\254l\242\63)\0V\11\255t\262Ne\312\21W\12\255"
+    "t\262J*\251.\0X\11\254l\242L*\312\0Y\12\255tr\252\63\312(\2Z\7\253df*"
+    "\7p\10\255\364V\266\323\2q\7\255\364\216\257\5r\10\253d\242\32*"
+    "\2t\6\255t\376#w\11"
+    "\255\364V\245FN\13x\6\233dR\7\0\0\0\4\377\377\0";
+
+/*
+ * Font: STK-L.bdf 36pt
+ * https://stncrn.github.io/u8g2-unifont-helper/
+ * "%/0123456789ABCDEFILNORSTUVXx"
+ */
+const uint8_t LARGE_FONT[766] U8G2_FONT_SECTION("stk-l") =
+    "\35\0\4\4\4\5\3\1\6\20\30\0\0\27\0\0\0\1\77\0\0\2\341%'\17;\226\261\245FL"
+    "\64B\214\30\22\223\220)"
+    "Bj\10Q\232\214\42R\206\310\210\21d\304\30\32a\254\304\270!\0/\14"
+    "\272\272\275\311H\321g\343\306\1\60\37|\373\35CJT\20:"
+    "fW\207\320\210\60\42\304\204\30D\247"
+    "\214\331\354\20\11%"
+    "\212\314\0\61\24z\275\245a\244\12\231\71\63b\214\220q\363\377(E\6\62\33|"
+    "\373\35ShT\20:fl\344\14\211\231\301\306T\71\202#g\371\340\201\1\63\34|"
+    "\373\35ShT"
+    "\20:fl\344@r\264\263\222\344,\215\35\42\241\6\225\31\0\64 "
+    "|\373-!\203\206\214!\62\204"
+    "\314\220A#\10\215\30\65b\324\210Q\306\354\354\1\213\225\363\1\65\32|"
+    "\373\15\25[\214\234/\10)"
+    "Y\61j\350\310Y\32;DB\15*\63\0\66\33}\33\236SiV\14;gt^\230Y\302\202\324"
+    "\71\273;EbM\252\63\0\67\23|\373\205\25\17R\316\207\344\350p\312\201#"
+    "\347\35\0\70 |\373"
+    "\35ShT\20:f\331!\22D\310 "
+    ":\205\206\10\11B\307\354\354\20\11\65\250\314\0\71\32|\373"
+    "\35ShT\20:fg\207H,Q\223r\276\30DB\15*\63\0A\26}\33\246r\247\322P\62"
+    "j\310\250\21\343\354\335\203\357\354w\3B$}"
+    "\33\206Dj\226\214\42\61l\304\260\21\303F\14\33\61"
+    "\212\304\222MF\221\30v\316\236=\10\301b\11\0C\27}"
+    "\33\236Si\226\20Bft\376O\211\215"
+    " Db\215\42$\0D\33}\33\206Dj\226\214\32\62l\304\260\21\343\354\177vl\304("
+    "\22K\324"
+    "$\2E\22|\373\205\17R\316KD\30\215\234_>x`\0F\20|"
+    "\373\205\17R\316\227i\262\31"
+    "\71\377\22\0I\7s\333\204\77HL\15{\333\205\201\363\377\77|\360`\0N$}"
+    "\33\6\201\346\314"
+    "\35;\206\12U\242D&\306\230\30cd\210\221!fF\230\31a(+\314\256\63\67\0O\26}"
+    "\33"
+    "\236Si\226\214\32\61\316\376\277\33\61j\310\232Tg\0R\61\216;\6Ek\230\14#"
+    "\61n\304\270"
+    "\21\343F\214\33\61n\304\60\22\243\210\60Q\224j\310\260\61\243\306\20\232"
+    "\325\230QD\206\221\30\67b"
+    "\334\301\1S\42\216;\236c\211\226\220\42\61n\304\270\21c\307R\232,["
+    "\262\203\307\216\65h\16\25"
+    "\21&\253\320\0T\15}\33\206\17R\15\235\377\377\25\0U\21|"
+    "\373\205a\366\377\237\215\30\64D\15"
+    "*\63\0V\26\177\371\205\221\366\377\313\21\343\206\220\42C\25\11r'"
+    "\313\16\3X)~;\206\201\6"
+    "\217\221\30\66\204\20\31\42\244\206\14Cg\320$Q\222\6\315!"
+    "\33\62\212\10\31BD\206\215 v\320"
+    "\302\1x\24\312\272\205A\206\216\220@c\212\224\31$"
+    "S\14\262h\0\0\0\0\4\377\377\0";
+
+#define play_icon_width 14
+#define play_icon_height 14
+static const unsigned char play_icon[28] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x7C, 0x00, 0xFC, 0x00,
+    0xFC, 0x03, 0xFC, 0x0F, 0xFC, 0x0F, 0xFC, 0x03, 0xFC, 0x00,
+    0x7C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00};
+static const unsigned char pause_icon[28] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E,
+    0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E,
+    0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x00, 0x00};
+
+// Constants for screen layout and fonts
+constexpr uint8_t SCREEN_CENTER_X = 32;
+constexpr uint8_t MAIN_TEXT_Y = 26;
+constexpr uint8_t SUB_TEXT_Y = 40;
+constexpr uint8_t VISIBLE_MENU_ITEMS = 3;
+constexpr uint8_t MENU_ITEM_HEIGHT = 14;
+constexpr uint8_t MENU_BOX_PADDING = 4;
+constexpr uint8_t MENU_BOX_WIDTH = 64;
+constexpr uint8_t CHANNEL_BOXES_Y = 50;
+constexpr uint8_t CHANNEL_BOX_WIDTH = 18;
+constexpr uint8_t CHANNEL_BOX_HEIGHT = 14;
+
+// Menu items for editing global parameters.
+enum ParamsMainPage : uint8_t {
+  PARAM_MAIN_TEMPO,
+  PARAM_MAIN_RUN,
+  PARAM_MAIN_RESET,
+  PARAM_MAIN_SOURCE,
+  PARAM_MAIN_PULSE,
+  PARAM_MAIN_ENCODER_DIR,
+  PARAM_MAIN_ROTATE_DISP,
+  PARAM_MAIN_SAVE_DATA,
+  PARAM_MAIN_LOAD_DATA,
+  PARAM_MAIN_RESET_STATE,
+  PARAM_MAIN_FACTORY_RESET,
+  PARAM_MAIN_LAST,
+};
+
+// Menu items for editing channel parameters.
+enum ParamsChannelPage : uint8_t {
+  PARAM_CH_MOD,
+  PARAM_CH_EUC_STEPS,
+  PARAM_CH_EUC_HITS,
+  PARAM_CH_CV1_DEST,
+  PARAM_CH_CV2_DEST,
+  PARAM_CH_LAST,
+};
+
+// Helper function to draw centered text
+void drawCenteredText(const char *text, int y, const uint8_t *font) {
+  gravity.display.setFont(font);
+  int textWidth = gravity.display.getStrWidth(text);
+  gravity.display.drawStr(SCREEN_CENTER_X - (textWidth / 2), y, text);
+}
+
+// Helper function to draw right-aligned text
+void drawRightAlignedText(const char *text, int y) {
+  int textWidth = gravity.display.getStrWidth(text);
+  int drawX = (SCREEN_WIDTH - textWidth) - MENU_BOX_PADDING;
+  gravity.display.drawStr(drawX, y, text);
+}
+
+void drawMainSelection() {
+  gravity.display.setDrawColor(1);
+  const int tickSize = 3;
+  const int mainWidth = SCREEN_WIDTH / 2;
+  const int mainHeight = 49;
+  gravity.display.drawLine(0, 0, tickSize, 0);
+  gravity.display.drawLine(0, 0, 0, tickSize);
+  gravity.display.drawLine(mainWidth, 0, mainWidth - tickSize, 0);
+  gravity.display.drawLine(mainWidth, 0, mainWidth, tickSize);
+  gravity.display.drawLine(mainWidth, mainHeight, mainWidth,
+                           mainHeight - tickSize);
+  gravity.display.drawLine(mainWidth, mainHeight, mainWidth - tickSize,
+                           mainHeight);
+  gravity.display.drawLine(0, mainHeight, tickSize, mainHeight);
+  gravity.display.drawLine(0, mainHeight, 0, mainHeight - tickSize);
+  gravity.display.setDrawColor(2);
+}
+
+void drawMenuItems(String menu_items[], int menu_size) {
+  // Draw menu items
+  gravity.display.setFont(TEXT_FONT);
+
+  // Draw selected menu item box
+  int selectedBoxY = 0;
+  if (menu_size >= VISIBLE_MENU_ITEMS && app.selected_param == menu_size - 1) {
+    selectedBoxY = MENU_ITEM_HEIGHT * min(2, app.selected_param);
+  } else if (app.selected_param > 0) {
+    selectedBoxY = MENU_ITEM_HEIGHT;
+  }
+
+  int boxX = MENU_BOX_WIDTH + 1;
+  int boxY = selectedBoxY + 2;
+  int boxWidth = MENU_BOX_WIDTH - 1;
+  int boxHeight = MENU_ITEM_HEIGHT + 1;
+
+  if (app.editing_param) {
+    gravity.display.drawBox(boxX, boxY, boxWidth, boxHeight);
+    drawMainSelection();
+  } else {
+    gravity.display.drawFrame(boxX, boxY, boxWidth, boxHeight);
+  }
+
+  // Draw the visible menu items
+  int start_index = 0;
+  if (menu_size >= VISIBLE_MENU_ITEMS && app.selected_param == menu_size - 1) {
+    start_index = menu_size - VISIBLE_MENU_ITEMS;
+  } else if (app.selected_param > 0) {
+    start_index = app.selected_param - 1;
+  }
+
+  for (int i = 0; i < min(menu_size, VISIBLE_MENU_ITEMS); ++i) {
+    int idx = start_index + i;
+    drawRightAlignedText(menu_items[idx].c_str(),
+                         MENU_ITEM_HEIGHT * (i + 1) - 1);
+  }
+}
+
+// Visual indicators for main section of screen.
+inline void solidTick() { gravity.display.drawBox(56, 4, 4, 4); }
+inline void hollowTick() { gravity.display.drawBox(56, 4, 4, 4); }
+
+// Human friendly display value for save slot.
+String displaySaveSlot(int slot) {
+  if (slot >= 0 && slot < StateManager::MAX_SAVE_SLOTS / 2) {
+    return String("A") + String(slot + 1);
+  } else if (slot >= StateManager::MAX_SAVE_SLOTS / 2 &&
+             slot <= StateManager::MAX_SAVE_SLOTS) {
+    return String("B") + String(slot - (StateManager::MAX_SAVE_SLOTS / 2) + 1);
+  }
+}
+
+// Main display functions
+
+void DisplayMainPage() {
+  gravity.display.setFontMode(1);
+  gravity.display.setDrawColor(2);
+  gravity.display.setFont(TEXT_FONT);
+
+  // Display selected editable value
+  String mainText;
+  String subText;
+
+  switch (app.selected_param) {
+  case PARAM_MAIN_TEMPO:
+    // Serial MIDI is too unstable to display bpm in real time.
+    if (app.selected_source == Clock::SOURCE_EXTERNAL_MIDI) {
+      mainText = F("EXT");
+    } else {
+      mainText = String(gravity.clock.Tempo());
+    }
+    subText = F("BPM");
+    break;
+  case PARAM_MAIN_RUN:
+    mainText = F("RUN");
+    switch (app.cv_run) {
+    case 0:
+      subText = F("NONE");
+      break;
+    case 1:
+      subText = F("CV1 GATE");
+      break;
+    case 2:
+      subText = F("CV2 GATE");
+      break;
+    }
+    break;
+  case PARAM_MAIN_RESET:
+    mainText = F("RST");
+    switch (app.cv_reset) {
+    case 0:
+      subText = F("NONE");
+      break;
+    case 1:
+      subText = F("CV1 TRIG");
+      break;
+    case 2:
+      subText = F("CV2 TRIG");
+      break;
+    }
+    break;
+  case PARAM_MAIN_SOURCE:
+    mainText = F("EXT");
+    switch (app.selected_source) {
+    case Clock::SOURCE_INTERNAL:
+      mainText = F("INT");
+      subText = F("CLOCK");
+      break;
+    case Clock::SOURCE_EXTERNAL_PPQN_24:
+      subText = F("24 PPQN");
+      break;
+    case Clock::SOURCE_EXTERNAL_PPQN_4:
+      subText = F("4 PPQN");
+      break;
+    case Clock::SOURCE_EXTERNAL_PPQN_2:
+      subText = F("2 PPQN");
+      break;
+    case Clock::SOURCE_EXTERNAL_PPQN_1:
+      subText = F("1 PPQN");
+      break;
+    case Clock::SOURCE_EXTERNAL_MIDI:
+      subText = F("MIDI");
+      break;
+    }
+    break;
+  case PARAM_MAIN_PULSE:
+    mainText = F("OUT");
+    switch (app.selected_pulse) {
+    case Clock::PULSE_NONE:
+      subText = F("PULSE OFF");
+      break;
+    case Clock::PULSE_PPQN_24:
+      subText = F("24 PPQN PULSE");
+      break;
+    case Clock::PULSE_PPQN_4:
+      subText = F("4 PPQN PULSE");
+      break;
+    case Clock::PULSE_PPQN_1:
+      subText = F("1 PPQN PULSE");
+      break;
+    }
+    break;
+  case PARAM_MAIN_ENCODER_DIR:
+    mainText = F("DIR");
+    subText = app.selected_sub_param == 0 ? F("DEFAULT") : F("REVERSED");
+    break;
+  case PARAM_MAIN_ROTATE_DISP:
+    mainText = F("DISP");
+    subText = app.selected_sub_param == 0 ? F("DEFAULT") : F("ROTATED");
+    break;
+  case PARAM_MAIN_SAVE_DATA:
+  case PARAM_MAIN_LOAD_DATA:
+    if (app.selected_sub_param == StateManager::MAX_SAVE_SLOTS) {
+      mainText = F("x");
+      subText = F("BACK TO MAIN");
+    } else {
+      // Indicate currently active slot.
+      if (app.selected_sub_param == app.selected_save_slot) {
+        solidTick();
+      }
+      mainText = displaySaveSlot(app.selected_sub_param);
+      subText = (app.selected_param == PARAM_MAIN_SAVE_DATA)
+                    ? F("SAVE TO SLOT")
+                    : F("LOAD FROM SLOT");
+    }
+    break;
+  case PARAM_MAIN_RESET_STATE:
+    if (app.selected_sub_param == 0) {
+      mainText = F("RST");
+      subText = F("RESET ALL");
+    } else {
+      mainText = F("x");
+      subText = F("BACK TO MAIN");
+    }
+    break;
+  case PARAM_MAIN_FACTORY_RESET:
+    if (app.selected_sub_param == 0) {
+      mainText = F("DEL");
+      subText = F("FACTORY RESET");
+    } else {
+      mainText = F("x");
+      subText = F("BACK TO MAIN");
+    }
+    break;
+  }
+
+  drawCenteredText(mainText.c_str(), MAIN_TEXT_Y, LARGE_FONT);
+  drawCenteredText(subText.c_str(), SUB_TEXT_Y, TEXT_FONT);
+
+  // Draw Main Page menu items
+  String menu_items[PARAM_MAIN_LAST] = {
+      F("TEMPO"),     F("RUN"),         F("RST"),         F("SOURCE"),
+      F("PULSE OUT"), F("ENCODER DIR"), F("ROTATE DISP"), F("SAVE"),
+      F("LOAD"),      F("RESET"),       F("ERASE")};
+  drawMenuItems(menu_items, PARAM_MAIN_LAST);
+}
+
+void DisplayChannelPage() {
+  auto &ch = GetSelectedChannel();
+
+  gravity.display.setFontMode(1);
+  gravity.display.setDrawColor(2);
+
+  // Display selected editable value
+  String mainText;
+  String subText;
+
+  // When editing a param, just show the base value. When not editing show
+  // the value with cv mod.
+  bool withCvMod = !app.editing_param;
+
+  switch (app.selected_param) {
+  case PARAM_CH_MOD: {
+    int mod_value = ch.getClockMod(withCvMod);
+    if (mod_value > 1) {
+      mainText = F("/");
+      mainText += String(mod_value);
+      subText = F("DIVIDE");
+    } else {
+      mainText = F("x");
+      mainText += String(abs(mod_value));
+      subText = F("MULTIPLY");
+    }
+    break;
+  }
+
+  case PARAM_CH_EUC_STEPS:
+    mainText = String(ch.getSteps(withCvMod));
+    subText = "EUCLID STEPS";
+    break;
+  case PARAM_CH_EUC_HITS:
+    mainText = String(ch.getHits(withCvMod));
+    subText = "EUCLID HITS";
+    break;
+  case PARAM_CH_CV1_DEST:
+  case PARAM_CH_CV2_DEST: {
+    mainText = (app.selected_param == PARAM_CH_CV1_DEST) ? F("CV1") : F("CV2");
+    switch ((app.selected_param == PARAM_CH_CV1_DEST) ? ch.getCv1Dest()
+                                                      : ch.getCv2Dest()) {
+    case CV_DEST_NONE:
+      subText = F("NONE");
+      break;
+    case CV_DEST_MOD:
+      subText = F("CLOCK MOD");
+      break;
+
+    case CV_DEST_EUC_STEPS:
+      subText = F("EUCLID STEPS");
+      break;
+    case CV_DEST_EUC_HITS:
+      subText = F("EUCLID HITS");
+      break;
+    }
+    break;
+  }
+  }
+
+  drawCenteredText(mainText.c_str(), MAIN_TEXT_Y, LARGE_FONT);
+  drawCenteredText(subText.c_str(), SUB_TEXT_Y, TEXT_FONT);
+
+  // Draw Channel Page menu items
+  String menu_items[PARAM_CH_LAST] = {F("MOD"), F("EUCLID STEPS"),
+                                      F("EUCLID HITS"), F("CV1 MOD"),
+                                      F("CV2 MOD")};
+  drawMenuItems(menu_items, PARAM_CH_LAST);
+}
+
+void DisplaySelectedChannel() {
+  int boxX = CHANNEL_BOX_WIDTH;
+  int boxY = CHANNEL_BOXES_Y;
+  int boxWidth = CHANNEL_BOX_WIDTH;
+  int boxHeight = CHANNEL_BOX_HEIGHT;
+  int textOffset = 7; // Half of font width
+
+  // Draw top and right side of frame.
+  gravity.display.drawHLine(1, boxY, SCREEN_WIDTH - 2);
+  gravity.display.drawVLine(SCREEN_WIDTH - 2, boxY, boxHeight);
+
+  for (int i = 0; i < Gravity::OUTPUT_COUNT + 1; i++) {
+    // Draw box frame or filled selected box.
+    gravity.display.setDrawColor(1);
+    (app.selected_channel == i)
+        ? gravity.display.drawBox(i * boxWidth, boxY, boxWidth, boxHeight)
+        : gravity.display.drawVLine(i * boxWidth, boxY, boxHeight);
+
+    // Draw clock status icon or each channel number.
+    gravity.display.setDrawColor(2);
+    if (i == 0) {
+      gravity.display.setBitmapMode(1);
+      auto icon = gravity.clock.IsPaused() ? pause_icon : play_icon;
+      gravity.display.drawXBMP(2, boxY, play_icon_width, play_icon_height,
+                               icon);
+    } else {
+      gravity.display.setFont(TEXT_FONT);
+      gravity.display.setCursor((i * boxWidth) + textOffset, SCREEN_HEIGHT - 3);
+      gravity.display.print(i);
+    }
+  }
+}
+
+void UpdateDisplay() {
+  app.refresh_screen = false;
+  gravity.display.firstPage();
+  do {
+    if (app.selected_channel == 0) {
+      DisplayMainPage();
+    } else {
+      DisplayChannelPage();
+    }
+    // Global channel select UI.
+    DisplaySelectedChannel();
+  } while (gravity.display.nextPage());
+}
+
+void Bootsplash() {
+  gravity.display.firstPage();
+  do {
+    int textWidth;
+    String loadingText = F("LOADING....");
+    gravity.display.setFont(TEXT_FONT);
+
+    textWidth = gravity.display.getStrWidth(StateManager::SKETCH_NAME);
+    gravity.display.drawStr(16 + (textWidth / 2), 20,
+                            StateManager::SKETCH_NAME);
+
+    textWidth = gravity.display.getStrWidth(StateManager::SEMANTIC_VERSION);
+    gravity.display.drawStr(16 + (textWidth / 2), 32,
+                            StateManager::SEMANTIC_VERSION);
+
+    textWidth = gravity.display.getStrWidth(loadingText.c_str());
+    gravity.display.drawStr(26 + (textWidth / 2), 44, loadingText.c_str());
+  } while (gravity.display.nextPage());
+}
+
+#endif // DISPLAY_H

firmware/Euclidean/save_state.cpp

@@ -0,0 +1,237 @@
+/**
+ * @file save_state.cpp
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version 2.0.1
+ * @date 2025-07-04
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#include "save_state.h"
+
+#include <EEPROM.h>
+
+#include "app_state.h"
+
+// Define the constants for the current firmware.
+const char StateManager::SKETCH_NAME[] = "ALT EUCLIDEAN";
+const char StateManager::SEMANTIC_VERSION[] =
+    "V2.0.1BETA1"; // NOTE: This should match the version in the
+                   // library.properties file.
+
+// Number of available save slots.
+const byte StateManager::MAX_SAVE_SLOTS = 10;
+const byte StateManager::TRANSIENT_SLOT = 10;
+
+// Define the minimum amount of time between EEPROM writes.
+const unsigned long StateManager::SAVE_DELAY_MS = 2000;
+
+// Calculate the starting address for EepromData, leaving space for metadata.
+const int StateManager::METADATA_START_ADDR = 0;
+const int StateManager::EEPROM_DATA_START_ADDR = sizeof(StateManager::Metadata);
+
+StateManager::StateManager() : _isDirty(false), _lastChangeTime(0) {}
+
+bool StateManager::initialize(AppState &app) {
+  noInterrupts();
+  bool success = false;
+  if (_isDataValid()) {
+    // Load global settings.
+    _loadMetadata(app);
+    // Load app data from the transient slot.
+    _loadState(app, TRANSIENT_SLOT);
+    success = true;
+  }
+  // EEPROM does not contain save data for this firmware & version.
+  else {
+    // Erase EEPROM and initialize state. Save default pattern to all save
+    // slots.
+    factoryReset(app);
+  }
+  interrupts();
+  return success;
+}
+
+bool StateManager::loadData(AppState &app, byte slot_index) {
+  // Check if slot_index is within max range + 1 for transient.
+  if (slot_index >= MAX_SAVE_SLOTS + 1)
+    return false;
+
+  noInterrupts();
+
+  // Load the state data from the specified EEPROM slot and update the app state
+  // save slot.
+  _loadState(app, slot_index);
+  app.selected_save_slot = slot_index;
+  // Persist this change in the global metadata on next update.
+  _isDirty = true;
+
+  interrupts();
+  return true;
+}
+
+// Save app state to user specified save slot.
+void StateManager::saveData(const AppState &app) {
+  noInterrupts();
+  // Check if slot_index is within max range + 1 for transient.
+  if (app.selected_save_slot >= MAX_SAVE_SLOTS + 1) {
+    interrupts();
+    return;
+  }
+
+  _saveState(app, app.selected_save_slot);
+  _saveMetadata(app);
+  _isDirty = false;
+  interrupts();
+}
+
+// Save transient state if it has changed and enough time has passed since last
+// save.
+void StateManager::update(const AppState &app) {
+  if (_isDirty && (millis() - _lastChangeTime > SAVE_DELAY_MS)) {
+    noInterrupts();
+    _saveState(app, TRANSIENT_SLOT);
+    _saveMetadata(app);
+    _isDirty = false;
+    interrupts();
+  }
+}
+
+void StateManager::reset(AppState &app) {
+  noInterrupts();
+
+  AppState default_app;
+  app.tempo = default_app.tempo;
+  app.selected_param = default_app.selected_param;
+  app.selected_channel = default_app.selected_channel;
+  app.selected_source = default_app.selected_source;
+  app.selected_pulse = default_app.selected_pulse;
+  app.cv_run = default_app.cv_run;
+  app.cv_reset = default_app.cv_reset;
+
+  for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+    app.channel[i].Init();
+  }
+
+  // Load global settings from Metadata
+  _loadMetadata(app);
+
+  _isDirty = false;
+  interrupts();
+}
+
+void StateManager::markDirty() {
+  _isDirty = true;
+  _lastChangeTime = millis();
+}
+
+// Erases all data in the EEPROM by writing 0 to every address.
+void StateManager::factoryReset(AppState &app) {
+  noInterrupts();
+  for (unsigned int i = 0; i < EEPROM.length(); i++) {
+    EEPROM.write(i, 0);
+  }
+  // Initialize eeprom and save default patter to all save slots.
+  _saveMetadata(app);
+  reset(app);
+  for (int i = 0; i < MAX_SAVE_SLOTS; i++) {
+    app.selected_save_slot = i;
+    _saveState(app, i);
+  }
+  _saveState(app, TRANSIENT_SLOT);
+  interrupts();
+}
+
+bool StateManager::_isDataValid() {
+  Metadata metadata;
+  EEPROM.get(METADATA_START_ADDR, metadata);
+  bool name_match = (strcmp(metadata.sketch_name, SKETCH_NAME) == 0);
+  bool version_match = (strcmp(metadata.version, SEMANTIC_VERSION) == 0);
+  return name_match && version_match;
+}
+
+void StateManager::_saveState(const AppState &app, byte slot_index) {
+  // Check if slot_index is within max range + 1 for transient.
+  if (app.selected_save_slot >= MAX_SAVE_SLOTS + 1)
+    return;
+
+  static EepromData save_data;
+
+  save_data.tempo = app.tempo;
+  save_data.selected_param = app.selected_param;
+  save_data.selected_channel = app.selected_channel;
+  save_data.selected_source = static_cast<byte>(app.selected_source);
+  save_data.selected_pulse = static_cast<byte>(app.selected_pulse);
+  save_data.cv_run = app.cv_run;
+  save_data.cv_reset = app.cv_reset;
+
+  // TODO: break this out into a separate function. Save State should be
+  // broken out into global / per-channel save methods. When saving via
+  // "update" only save state for the current channel since other channels
+  // will not have changed when saving user edits.
+  for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+    const auto &ch = app.channel[i];
+    auto &save_ch = save_data.channel_data[i];
+    save_ch.base_clock_mod_index = ch.getClockModIndex(false);
+    save_ch.base_euc_steps = ch.getSteps(false);
+    save_ch.base_euc_hits = ch.getHits(false);
+    save_ch.cv1_dest = static_cast<byte>(ch.getCv1Dest());
+    save_ch.cv2_dest = static_cast<byte>(ch.getCv2Dest());
+  }
+
+  int address = EEPROM_DATA_START_ADDR + (slot_index * sizeof(EepromData));
+  EEPROM.put(address, save_data);
+}
+
+void StateManager::_loadState(AppState &app, byte slot_index) {
+  // Check if slot_index is within max range + 1 for transient.
+  if (slot_index >= MAX_SAVE_SLOTS + 1)
+    return;
+
+  static EepromData load_data;
+  int address = EEPROM_DATA_START_ADDR + (slot_index * sizeof(EepromData));
+  EEPROM.get(address, load_data);
+
+  // Restore app state from loaded data.
+  app.tempo = load_data.tempo;
+  app.selected_param = load_data.selected_param;
+  app.selected_channel = load_data.selected_channel;
+  app.selected_source = static_cast<Clock::Source>(load_data.selected_source);
+  app.selected_pulse = static_cast<Clock::Pulse>(load_data.selected_pulse);
+  app.cv_run = load_data.cv_run;
+  app.cv_reset = load_data.cv_reset;
+
+  for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
+    auto &ch = app.channel[i];
+    const auto &saved_ch_state = load_data.channel_data[i];
+
+    ch.setClockMod(saved_ch_state.base_clock_mod_index);
+    ch.setSteps(saved_ch_state.base_euc_steps);
+    ch.setHits(saved_ch_state.base_euc_hits);
+    ch.setCv1Dest(static_cast<CvDestination>(saved_ch_state.cv1_dest));
+    ch.setCv2Dest(static_cast<CvDestination>(saved_ch_state.cv2_dest));
+  }
+}
+
+void StateManager::_saveMetadata(const AppState &app) {
+  Metadata current_meta;
+  strcpy(current_meta.sketch_name, SKETCH_NAME);
+  strcpy(current_meta.version, SEMANTIC_VERSION);
+
+  // Global user settings
+  current_meta.selected_save_slot = app.selected_save_slot;
+  current_meta.encoder_reversed = app.encoder_reversed;
+  current_meta.rotate_display = app.rotate_display;
+
+  EEPROM.put(METADATA_START_ADDR, current_meta);
+}
+
+void StateManager::_loadMetadata(AppState &app) {
+  Metadata metadata;
+  EEPROM.get(METADATA_START_ADDR, metadata);
+  app.selected_save_slot = metadata.selected_save_slot;
+  app.encoder_reversed = metadata.encoder_reversed;
+  app.rotate_display = metadata.rotate_display;
+}

firmware/Euclidean/save_state.h

@@ -0,0 +1,96 @@
+/**
+ * @file save_state.h
+ * @author Adam Wonak (https://github.com/awonak/)
+ * @brief Alt firmware version of Gravity by Sitka Instruments.
+ * @version 2.0.1
+ * @date 2025-07-04
+ *
+ * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ *
+ */
+
+#ifndef SAVE_STATE_H
+#define SAVE_STATE_H
+
+#include <Arduino.h>
+#include <libGravity.h>
+
+// Forward-declare AppState to avoid circular dependencies.
+struct AppState;
+
+/**
+ * @brief Manages saving and loading of the application state to and from
+ * EEPROM. The number of user slots is defined by MAX_SAVE_SLOTS, and one
+ * additional slot is reseved for transient state to persist state between power
+ * cycles before state is explicitly saved to a user slot. Metadata is stored in
+ * the beginning of the memory space which stores firmware version information
+ * to validate that the data can be loaded into the current version of AppState.
+ */
+class StateManager {
+public:
+  static const char SKETCH_NAME[];
+  static const char SEMANTIC_VERSION[];
+  static const byte MAX_SAVE_SLOTS;
+  static const byte TRANSIENT_SLOT;
+
+  StateManager();
+
+  // Populate the AppState instance with values from EEPROM if they exist.
+  bool initialize(AppState &app);
+  // Load data from specified slot.
+  bool loadData(AppState &app, byte slot_index);
+  // Save data to specified slot.
+  void saveData(const AppState &app);
+  // Reset AppState instance back to default values.
+  void reset(AppState &app);
+  // Call from main loop, check if state has changed and needs to be saved.
+  void update(const AppState &app);
+  // Indicate that state has changed and we should save.
+  void markDirty();
+  // Erase all data stored in the EEPROM.
+  void factoryReset(AppState &app);
+
+  // This struct holds the data that identifies the firmware version.
+  struct Metadata {
+    char sketch_name[16];
+    char version[16];
+    // Additional global/hardware settings
+    byte selected_save_slot;
+    bool encoder_reversed;
+    bool rotate_display;
+  };
+  struct ChannelState {
+    byte base_clock_mod_index;
+    byte base_euc_steps;
+    byte base_euc_hits;
+    byte cv1_dest; // Cast the CvDestination enum as a byte for storage
+    byte cv2_dest; // Cast the CvDestination enum as a byte for storage
+  };
+  // This struct holds all the parameters we want to save.
+  struct EepromData {
+    int tempo;
+    byte selected_param;
+    byte selected_channel;
+    byte selected_source;
+    byte selected_pulse;
+    byte cv_run;
+    byte cv_reset;
+    ChannelState channel_data[Gravity::OUTPUT_COUNT];
+  };
+
+private:
+  bool _isDataValid();
+  void _saveMetadata(const AppState &app);
+  void _loadMetadata(AppState &app);
+  void _saveState(const AppState &app, byte slot_index);
+  void _loadState(AppState &app, byte slot_index);
+
+  static const unsigned long SAVE_DELAY_MS;
+  static const int METADATA_START_ADDR;
+  static const int EEPROM_DATA_START_ADDR;
+
+  bool _isDirty;
+  unsigned long _lastChangeTime;
+};
+
+#endif // SAVE_STATE_H

firmware/Gravity/Gravity.ino

@@ -2,11 +2,10 @@
  * @file Gravity.ino
  * @author Adam Wonak (https://github.com/awonak/)
  * @brief Alt firmware version of Gravity by Sitka Instruments.
- * @version v2.0.0 - June 2025 awonak - Full rewrite
+ * @version v2.0.1beta1 - February 2026 awonak
- * @version v1.0 - August 2023 Oleksiy H - Initial release
+ * @date 2026-02-21
- * @date 2025-07-04
  *
- * @copyright MIT - (c) 2025 - Adam Wonak - adam.wonak@gmail.com
+ * @copyright MIT - (c) 2026 - Adam Wonak - adam.wonak@gmail.com
  *
  * This version of Gravity firmware is a full rewrite that leverages the
  * libGravity hardware abstraction library. The goal of this project was to
@@ -34,17 +33,20 @@
  *      Play/pause - start or stop the internal clock.
  *
  * BTN2:
- *      Shift - hold and rotate encoder to change current selected output channel.
+ *      Shift - hold and rotate encoder to change current selected output
+ * channel.
  *
  * EXT:
  *      External clock input. When Gravity is set to INTERNAL or MIDI clock
  *      source, this input is used to reset clocks.
  *
  * CV1:
- *      External analog input used to provide modulation to any channel parameter.
+ *      External analog input used to provide modulation to any channel
+ * parameter.
  *
  * CV2:
- *      External analog input used to provide modulation to any channel parameter.
+ *      External analog input used to provide modulation to any channel
+ * parameter.
  *
  */
 
@@ -96,7 +98,7 @@ void loop() {
   int cv2 = gravity.cv2.Read();
 
   for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
-        auto& ch = app.channel[i];
+    auto &ch = app.channel[i];
     // Only apply CV to the channel when the current channel has cv
     // mod configured.
     if (ch.isCvModActive()) {
@@ -104,6 +106,28 @@ void loop() {
     }
   }
 
+  // Clock Run
+  if (app.cv_run == 1 || app.cv_run == 2) {
+    auto &cv = app.cv_run == 1 ? gravity.cv1 : gravity.cv2;
+    int val = cv.Read();
+    if (val > AnalogInput::GATE_THRESHOLD && gravity.clock.IsPaused()) {
+      gravity.clock.Start();
+      app.refresh_screen = true;
+    } else if (val < AnalogInput::GATE_THRESHOLD && !gravity.clock.IsPaused()) {
+      gravity.clock.Stop();
+      ResetOutputs();
+      app.refresh_screen = true;
+    }
+  }
+
+  // Clock Reset
+  if ((app.cv_reset == 1 &&
+       gravity.cv1.IsRisingEdge(AnalogInput::GATE_THRESHOLD)) ||
+      (app.cv_reset == 2 &&
+       gravity.cv2.IsRisingEdge(AnalogInput::GATE_THRESHOLD))) {
+    gravity.clock.Reset();
+  }
+
   // Check for dirty state eligible to be saved.
   stateManager.update(app);
 
@@ -141,7 +165,8 @@ void HandleIntClockTick(uint32_t tick) {
       break;
     }
 
-        const uint16_t pulse_high_ticks = pgm_read_word_near(&CLOCK_MOD_PULSES[clock_index]);
+    const uint16_t pulse_high_ticks =
+        pgm_read_word_near(&CLOCK_MOD_PULSES[clock_index]);
     const uint32_t pulse_low_ticks = tick + max((pulse_high_ticks / 2), 1L);
 
     if (tick % pulse_high_ticks == 0) {
@@ -185,15 +210,13 @@ void HandlePlayPressed() {
       }
     } else {
       // Mute selected channel
-            auto& ch = GetSelectedChannel();
+      auto &ch = GetSelectedChannel();
       ch.toggleMute();
     }
     return;
   }
 
-    gravity.clock.IsPaused()
+  gravity.clock.IsPaused() ? gravity.clock.Start() : gravity.clock.Stop();
-        ? gravity.clock.Start()
-        : gravity.clock.Stop();
   ResetOutputs();
   app.refresh_screen = true;
 }
@@ -207,6 +230,10 @@ void HandleEncoderPressed() {
         app.encoder_reversed = app.selected_sub_param == 1;
         gravity.encoder.SetReverseDirection(app.encoder_reversed);
       }
+      if (app.selected_param == PARAM_MAIN_ROTATE_DISP) {
+        app.rotate_display = app.selected_sub_param == 1;
+        gravity.display.setFlipMode(app.rotate_display ? 1 : 0);
+      }
       if (app.selected_param == PARAM_MAIN_SAVE_DATA) {
         if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
           app.selected_save_slot = app.selected_sub_param;
@@ -216,10 +243,18 @@ void HandleEncoderPressed() {
       if (app.selected_param == PARAM_MAIN_LOAD_DATA) {
         if (app.selected_sub_param < StateManager::MAX_SAVE_SLOTS) {
           app.selected_save_slot = app.selected_sub_param;
+          // Load pattern data into app state.
           stateManager.loadData(app, app.selected_save_slot);
+          // Load global performance settings if they have changed.
+          if (gravity.clock.Tempo() != app.tempo) {
+            gravity.clock.SetTempo(app.tempo);
+          }
+          // Load global settings only if clock is not active.
+          if (gravity.clock.IsPaused()) {
             InitGravity(app);
           }
         }
+      }
       if (app.selected_param == PARAM_MAIN_RESET_STATE) {
         if (app.selected_sub_param == 0) { // Reset
           stateManager.reset(app);
@@ -253,7 +288,8 @@ void HandleRotate(int val) {
 
   if (!app.editing_param) {
     // Navigation Mode
-        const int max_param = (app.selected_channel == 0) ? PARAM_MAIN_LAST : PARAM_CH_LAST;
+    const int max_param =
+        (app.selected_channel == 0) ? PARAM_MAIN_LAST : PARAM_CH_LAST;
     updateSelection(app.selected_param, val, max_param);
   } else {
     // Editing Mode
@@ -282,6 +318,14 @@ void editMainParameter(int val) {
     gravity.clock.SetTempo(gravity.clock.Tempo() + val);
     app.tempo = gravity.clock.Tempo();
     break;
+  case PARAM_MAIN_RUN:
+    updateSelection(app.selected_sub_param, val, 3);
+    app.cv_run = app.selected_sub_param;
+    break;
+  case PARAM_MAIN_RESET:
+    updateSelection(app.selected_sub_param, val, 3);
+    app.cv_reset = app.selected_sub_param;
+    break;
   case PARAM_MAIN_SOURCE: {
     byte source = static_cast<int>(app.selected_source);
     updateSelection(source, val, Clock::SOURCE_LAST);
@@ -298,12 +342,17 @@ void editMainParameter(int val) {
     }
     break;
   }
+  // These changes are applied upon encoder button press.
   case PARAM_MAIN_ENCODER_DIR:
     updateSelection(app.selected_sub_param, val, 2);
     break;
+  case PARAM_MAIN_ROTATE_DISP:
+    updateSelection(app.selected_sub_param, val, 2);
+    break;
   case PARAM_MAIN_SAVE_DATA:
   case PARAM_MAIN_LOAD_DATA:
-            updateSelection(app.selected_sub_param, val, StateManager::MAX_SAVE_SLOTS + 1);
+    updateSelection(app.selected_sub_param, val,
+                    StateManager::MAX_SAVE_SLOTS + 1);
     break;
   case PARAM_MAIN_RESET_STATE:
     updateSelection(app.selected_sub_param, val, 2);
@@ -315,7 +364,7 @@ void editMainParameter(int val) {
 }
 
 void editChannelParameter(int val) {
-    auto& ch = GetSelectedChannel();
+  auto &ch = GetSelectedChannel();
   switch (app.selected_param) {
   case PARAM_CH_MOD:
     ch.setClockMod(ch.getClockModIndex() + val);
@@ -332,12 +381,6 @@ void editChannelParameter(int val) {
   case PARAM_CH_SWING:
     ch.setSwing(ch.getSwing() + val);
     break;
-        case PARAM_CH_EUC_STEPS:
-            ch.setSteps(ch.getSteps() + val);
-            break;
-        case PARAM_CH_EUC_HITS:
-            ch.setHits(ch.getHits() + val);
-            break;
   case PARAM_CH_CV1_DEST: {
     byte dest = static_cast<int>(ch.getCv1Dest());
     updateSelection(dest, val, CV_DEST_LAST);
@@ -354,7 +397,7 @@ void editChannelParameter(int val) {
 }
 
 // Changes the param by the value provided.
-void updateSelection(byte& param, int change, int maxValue) {
+void updateSelection(byte &param, int change, int maxValue) {
   // Do not apply acceleration if max value is less than 25.
   if (maxValue < 25) {
     change = change > 0 ? 1 : -1;
@@ -366,10 +409,11 @@ void updateSelection(byte& param, int change, int maxValue) {
 // App Helper functions.
 //
 
-void InitGravity(AppState& app) {
+void InitGravity(AppState &app) {
   gravity.clock.SetTempo(app.tempo);
   gravity.clock.SetSource(app.selected_source);
   gravity.encoder.SetReverseDirection(app.encoder_reversed);
+  gravity.display.setFlipMode(app.rotate_display ? 1 : 0);
 }
 
 void ResetOutputs() {

firmware/Gravity/app_state.h

@@ -25,16 +25,19 @@ struct AppState {
   byte selected_channel = 0;   // 0=tempo, 1-6=output channel
   byte selected_swing = 0;
   byte selected_save_slot = 0; // The currently active save slot.
+  byte cv_run = 0;
+  byte cv_reset = 0;
   Clock::Source selected_source = Clock::SOURCE_INTERNAL;
   Clock::Pulse selected_pulse = Clock::PULSE_PPQN_24;
   bool editing_param = false;
   bool encoder_reversed = false;
+  bool rotate_display = false;
   bool refresh_screen = true;
 };
 
 extern AppState app;
 
-static Channel& GetSelectedChannel() {
+static Channel &GetSelectedChannel() {
   return app.channel[app.selected_channel - 1];
 }
 

firmware/Gravity/channel.h

@@ -15,8 +15,6 @@
 #include <Arduino.h>
 #include <libGravity.h>
 
-#include "euclidean.h"
-
 // Enums for CV Mod destination
 enum CvDestination : uint8_t {
   CV_DEST_NONE,
@@ -25,8 +23,6 @@ enum CvDestination : uint8_t {
   CV_DEST_DUTY,
   CV_DEST_OFFSET,
   CV_DEST_SWING,
-    CV_DEST_EUC_STEPS,
-    CV_DEST_EUC_HITS,
   CV_DEST_LAST,
 };
 
@@ -45,7 +41,8 @@ static const int CLOCK_MOD[MOD_CHOICE_SIZE] PROGMEM = {
 // that match the above div/mult mods.
 static const int CLOCK_MOD_PULSES[MOD_CHOICE_SIZE] PROGMEM = {
     // Divisor Pulses (96 * X)
-    12288, 6144, 3072, 2304, 1536, 1152, 1056, 960, 864, 768, 672, 576, 480, 384, 288, 192,
+    12288, 6144, 3072, 2304, 1536, 1152, 1056, 960, 864, 768, 672, 576, 480,
+    384, 288, 192,
     // Internal Clock Pulses
     96,
     // Multiplier Pulses (96 / X)
@@ -58,10 +55,8 @@ static const byte PULSE_PPQN_4_CLOCK_MOD_INDEX = MOD_CHOICE_SIZE - 6;
 static const byte PULSE_PPQN_1_CLOCK_MOD_INDEX = MOD_CHOICE_SIZE - 9;
 
 class Channel {
-   public:
+public:
-    Channel() {
+  Channel() { Init(); }
-        Init();
-    }
 
   void Init() {
     // Reset base values to their defaults
@@ -70,8 +65,6 @@ class Channel {
     base_duty_cycle = 50;
     base_offset = 0;
     base_swing = 50;
-        base_euc_steps = 1;
-        base_euc_hits = 1;
 
     cvmod_clock_mod_index = base_clock_mod_index;
     cvmod_probability = base_probability;
@@ -82,8 +75,6 @@ class Channel {
     cv1_dest = CV_DEST_NONE;
     cv2_dest = CV_DEST_NONE;
 
-        pattern.Init(DEFAULT_PATTERN);
-
     // Calcule the clock mod pulses on init.
     _recalculatePulses();
   }
@@ -129,20 +120,6 @@ class Channel {
     }
   }
 
-    // Euclidean
-    void setSteps(int val) {
-        base_euc_steps = constrain(val, 1, MAX_PATTERN_LEN);
-        if (cv1_dest != CV_DEST_EUC_STEPS && cv2_dest != CV_DEST_EUC_STEPS) {
-            pattern.SetSteps(val);
-        }
-    }
-    void setHits(int val) {
-        base_euc_hits = constrain(val, 1, base_euc_steps);
-        if (cv1_dest != CV_DEST_EUC_HITS && cv2_dest != CV_DEST_EUC_HITS) {
-            pattern.SetHits(val);
-        }
-    }
-
   void setCv1Dest(CvDestination dest) { cv1_dest = dest; }
   void setCv2Dest(CvDestination dest) { cv2_dest = dest; }
   CvDestination getCv1Dest() const { return cv1_dest; }
@@ -150,33 +127,46 @@ class Channel {
 
   // Getters (Get the BASE value for editing or cv modded value for display)
 
-    int getProbability(bool withCvMod = false) const { return withCvMod ? cvmod_probability : base_probability; }
+  int getProbability(bool withCvMod = false) const {
-    int getDutyCycle(bool withCvMod = false) const { return withCvMod ? cvmod_duty_cycle : base_duty_cycle; }
+    return withCvMod ? cvmod_probability : base_probability;
-    int getOffset(bool withCvMod = false) const { return withCvMod ? cvmod_offset : base_offset; }
+  }
-    int getSwing(bool withCvMod = false) const { return withCvMod ? cvmod_swing : base_swing; }
+  int getDutyCycle(bool withCvMod = false) const {
-    int getClockMod(bool withCvMod = false) const { return pgm_read_word_near(&CLOCK_MOD[getClockModIndex(withCvMod)]); }
+    return withCvMod ? cvmod_duty_cycle : base_duty_cycle;
-    int getClockModIndex(bool withCvMod = false) const { return withCvMod ? cvmod_clock_mod_index : base_clock_mod_index; }
+  }
-    bool isCvModActive() const { return cv1_dest != CV_DEST_NONE || cv2_dest != CV_DEST_NONE; }
+  int getOffset(bool withCvMod = false) const {
-
+    return withCvMod ? cvmod_offset : base_offset;
-    byte getSteps(bool withCvMod = false) const { return withCvMod ? pattern.GetSteps() : base_euc_steps; }
+  }
-    byte getHits(bool withCvMod = false) const { return withCvMod ? pattern.GetHits() : base_euc_hits; }
+  int getSwing(bool withCvMod = false) const {
+    return withCvMod ? cvmod_swing : base_swing;
+  }
+  int getClockMod(bool withCvMod = false) const {
+    return pgm_read_word_near(&CLOCK_MOD[getClockModIndex(withCvMod)]);
+  }
+  int getClockModIndex(bool withCvMod = false) const {
+    return withCvMod ? cvmod_clock_mod_index : base_clock_mod_index;
+  }
+  bool isCvModActive() const {
+    return cv1_dest != CV_DEST_NONE || cv2_dest != CV_DEST_NONE;
+  }
 
   void toggleMute() { mute = !mute; }
 
   /**
-     * @brief Processes a clock tick and determines if the output should be high or low.
+   * @brief Processes a clock tick and determines if the output should be high
-     * Note: this method is called from an ISR and must be kept as simple as possible.
+   * or low. Note: this method is called from an ISR and must be kept as simple
+   * as possible.
    * @param tick The current clock tick count.
    * @param output The output object to be modified.
    */
-    void processClockTick(uint32_t tick, DigitalOutput& output) {
+  void processClockTick(uint32_t tick, DigitalOutput &output) {
     // Mute check
     if (mute) {
       output.Low();
       return;
     }
 
-        const uint16_t mod_pulses = pgm_read_word_near(&CLOCK_MOD_PULSES[cvmod_clock_mod_index]);
+    const uint16_t mod_pulses =
+        pgm_read_word_near(&CLOCK_MOD_PULSES[cvmod_clock_mod_index]);
 
     // Conditionally apply swing on down beats.
     uint16_t swing_pulses = 0;
@@ -190,15 +180,6 @@ class Channel {
       // Step check
       if (current_tick_offset % mod_pulses == 0) {
         bool hit = cvmod_probability >= random(0, 100);
-                // Euclidean rhythm hit check
-                switch (pattern.NextStep()) {
-                    case Pattern::REST:  // Rest when active or fall back to probability
-                        hit = false;
-                        break;
-                    case Pattern::HIT:  // Hit if probability is true
-                        hit &= true;
-                        break;
-                }
         if (hit) {
           output.High();
         }
@@ -206,7 +187,8 @@ class Channel {
     }
 
     // Duty cycle low check
-        const uint32_t duty_cycle_end_tick = tick + _duty_pulses + _offset_pulses + swing_pulses;
+    const uint32_t duty_cycle_end_tick =
+        tick + _duty_pulses + _offset_pulses + swing_pulses;
     if (duty_cycle_end_tick % mod_pulses == 0) {
       output.Low();
     }
@@ -237,7 +219,8 @@ class Channel {
       return;
     }
 
-        int dest_mod = _calculateMod(CV_DEST_MOD, cv1_val, cv2_val, -(MOD_CHOICE_SIZE / 2), MOD_CHOICE_SIZE / 2);
+    int dest_mod = _calculateMod(CV_DEST_MOD, cv1_val, cv2_val,
+                                 -(MOD_CHOICE_SIZE / 2), MOD_CHOICE_SIZE / 2);
     cvmod_clock_mod_index = constrain(base_clock_mod_index + dest_mod, 0, 100);
 
     int prob_mod = _calculateMod(CV_DEST_PROB, cv1_val, cv2_val, -50, 50);
@@ -252,32 +235,32 @@ class Channel {
     int swing_mod = _calculateMod(CV_DEST_SWING, cv1_val, cv2_val, -25, 25);
     cvmod_swing = constrain(base_swing + swing_mod, 50, 95);
 
-        int step_mod = _calculateMod(CV_DEST_EUC_STEPS, cv1_val, cv2_val, 0, MAX_PATTERN_LEN);
-        pattern.SetSteps(base_euc_steps + step_mod);
-
-        int hit_mod = _calculateMod(CV_DEST_EUC_HITS, cv1_val, cv2_val, 0, pattern.GetSteps());
-        pattern.SetHits(base_euc_hits + hit_mod);
-
     // After all cvmod values are updated, recalculate clock pulse modifiers.
     _recalculatePulses();
   }
 
-   private:
+private:
-    int _calculateMod(CvDestination dest, int cv1_val, int cv2_val, int min_range, int max_range) {
+  int _calculateMod(CvDestination dest, int cv1_val, int cv2_val, int min_range,
-        int mod1 = (cv1_dest == dest) ? map(cv1_val, -512, 512, min_range, max_range) : 0;
+                    int max_range) {
-        int mod2 = (cv2_dest == dest) ? map(cv2_val, -512, 512, min_range, max_range) : 0;
+    int mod1 =
+        (cv1_dest == dest) ? map(cv1_val, -512, 512, min_range, max_range) : 0;
+    int mod2 =
+        (cv2_dest == dest) ? map(cv2_val, -512, 512, min_range, max_range) : 0;
     return mod1 + mod2;
   }
 
   void _recalculatePulses() {
-        const uint16_t mod_pulses = pgm_read_word_near(&CLOCK_MOD_PULSES[cvmod_clock_mod_index]);
+    const uint16_t mod_pulses =
-        _duty_pulses = max((long)((mod_pulses * (100L - cvmod_duty_cycle)) / 100L), 1L);
+        pgm_read_word_near(&CLOCK_MOD_PULSES[cvmod_clock_mod_index]);
+    _duty_pulses =
+        max((long)((mod_pulses * (100L - cvmod_duty_cycle)) / 100L), 1L);
     _offset_pulses = (long)((mod_pulses * (100L - cvmod_offset)) / 100L);
 
     // Calculate the down beat swing amount.
     if (cvmod_swing > 50) {
       int shifted_swing = cvmod_swing - 50;
-            _swing_pulse_amount = (long)((mod_pulses * (100L - shifted_swing)) / 100L);
+      _swing_pulse_amount =
+          (long)((mod_pulses * (100L - shifted_swing)) / 100L);
     } else {
       _swing_pulse_amount = 0;
     }
@@ -289,8 +272,6 @@ class Channel {
   byte base_duty_cycle;
   byte base_offset;
   byte base_swing;
-    byte base_euc_steps;
-    byte base_euc_hits;
 
   // Base value with cv mod applied.
   byte cvmod_clock_mod_index;
@@ -303,9 +284,6 @@ class Channel {
   CvDestination cv1_dest;
   CvDestination cv2_dest;
 
-    // Euclidean pattern
-    Pattern pattern;
-
   // Mute channel flag
   bool mute;
 

firmware/Gravity/display.h

@@ -29,17 +29,24 @@
 const uint8_t TEXT_FONT[437] U8G2_FONT_SECTION("velvetscreen") PROGMEM =
     "\64\0\2\2\3\3\2\3\4\5\5\0\0\5\0\5\0\0\221\0\0\1\230 \4\200\134%\11\255tT"
     "R\271RI(\6\252\334T\31)\7\252\134bJ\12+\7\233\345\322J\0,\5\221T\4-\5\213"
-    "f\6.\5\211T\2/\6\244\354c\33\60\10\254\354T\64\223\2\61\7\353\354\222\254\6\62\11\254l"
+    "f\6.\5\211T\2/"
-    "\66J*\217\0\63\11\254l\66J\32\215\4\64\10\254l\242\34\272\0\65\11\254l\206\336h$\0\66"
+    "\6\244\354c\33\60\10\254\354T\64\223\2\61\7\353\354\222\254\6\62\11\254l"
-    "\11\254\354T^\61)\0\67\10\254lF\216u\4\70\11\254\354TL*&\5\71\11\254\354TL;"
+    "\66J*"
+    "\217\0\63\11\254l\66J\32\215\4\64\10\254l\242\34\272\0\65\11\254l\206\336h"
+    "$\0\66"
+    "\11\254\354T^\61)\0\67\10\254lF\216u\4\70\11\254\354TL*&"
+    "\5\71\11\254\354TL;"
     ")\0:\6\231UR\0A\10\254\354T\34S\6B\11\254lV\34)\216\4C\11\254\354T\324\61"
     ")\0D\10\254lV\64G\2E\10\254l\206\36z\4F\10\254l\206^\71\3G\11\254\354TN"
-    "\63)\0H\10\254l\242\34S\6I\6\251T\206\0J\10\254\354k\231\24\0K\11\254l\242J\62"
+    "\63)"
+    "\0H\10\254l\242\34S\6I\6\251T\206\0J\10\254\354k\231\24\0K\11\254l\242J\62"
     "\225\1L\7\254lr{\4M\11\255t\362ZI\353\0N\11\255t\362TI\356\0O\10\254\354T"
-    "\64\223\2P\11\254lV\34)g\0Q\10\254\354T\264b\12R\10\254lV\34\251\31S\11\254\354"
+    "\64\223\2P\11\254lV\34)"
+    "g\0Q\10\254\354T\264b\12R\10\254lV\34\251\31S\11\254\354"
     "FF\32\215\4T\7\253dVl\1U\10\254l\242\63)\0V\11\255t\262Ne\312\21W\12\255"
     "t\262J*\251.\0X\11\254l\242L*\312\0Y\12\255tr\252\63\312(\2Z\7\253df*"
-    "\7p\10\255\364V\266\323\2q\7\255\364\216\257\5r\10\253d\242\32*\2t\6\255t\376#w\11"
+    "\7p\10\255\364V\266\323\2q\7\255\364\216\257\5r\10\253d\242\32*"
+    "\2t\6\255t\376#w\11"
     "\255\364V\245FN\13x\6\233dR\7\0\0\0\4\377\377\0";
 
 /*
@@ -49,40 +56,61 @@ const uint8_t TEXT_FONT[437] U8G2_FONT_SECTION("velvetscreen") PROGMEM =
  */
 const uint8_t LARGE_FONT[766] U8G2_FONT_SECTION("stk-l") =
     "\35\0\4\4\4\5\3\1\6\20\30\0\0\27\0\0\0\1\77\0\0\2\341%'\17;\226\261\245FL"
-    "\64B\214\30\22\223\220)Bj\10Q\232\214\42R\206\310\210\21d\304\30\32a\254\304\270!\0/\14"
+    "\64B\214\30\22\223\220)"
-    "\272\272\275\311H\321g\343\306\1\60\37|\373\35CJT\20:fW\207\320\210\60\42\304\204\30D\247"
+    "Bj\10Q\232\214\42R\206\310\210\21d\304\30\32a\254\304\270!\0/\14"
-    "\214\331\354\20\11%\212\314\0\61\24z\275\245a\244\12\231\71\63b\214\220q\363\377(E\6\62\33|"
+    "\272\272\275\311H\321g\343\306\1\60\37|\373\35CJT\20:"
-    "\373\35ShT\20:fl\344\14\211\231\301\306T\71\202#g\371\340\201\1\63\34|\373\35ShT"
+    "fW\207\320\210\60\42\304\204\30D\247"
-    "\20:fl\344@r\264\263\222\344,\215\35\42\241\6\225\31\0\64 |\373-!\203\206\214!\62\204"
+    "\214\331\354\20\11%"
-    "\314\220A#\10\215\30\65b\324\210Q\306\354\354\1\213\225\363\1\65\32|\373\15\25[\214\234/\10)"
+    "\212\314\0\61\24z\275\245a\244\12\231\71\63b\214\220q\363\377(E\6\62\33|"
+    "\373\35ShT\20:fl\344\14\211\231\301\306T\71\202#g\371\340\201\1\63\34|"
+    "\373\35ShT"
+    "\20:fl\344@r\264\263\222\344,\215\35\42\241\6\225\31\0\64 "
+    "|\373-!\203\206\214!\62\204"
+    "\314\220A#\10\215\30\65b\324\210Q\306\354\354\1\213\225\363\1\65\32|"
+    "\373\15\25[\214\234/\10)"
     "Y\61j\350\310Y\32;DB\15*\63\0\66\33}\33\236SiV\14;gt^\230Y\302\202\324"
-    "\71\273;EbM\252\63\0\67\23|\373\205\25\17R\316\207\344\350p\312\201#\347\35\0\70 |\373"
+    "\71\273;EbM\252\63\0\67\23|\373\205\25\17R\316\207\344\350p\312\201#"
-    "\35ShT\20:f\331!\22D\310 :\205\206\10\11B\307\354\354\20\11\65\250\314\0\71\32|\373"
+    "\347\35\0\70 |\373"
+    "\35ShT\20:f\331!\22D\310 "
+    ":\205\206\10\11B\307\354\354\20\11\65\250\314\0\71\32|\373"
     "\35ShT\20:fg\207H,Q\223r\276\30DB\15*\63\0A\26}\33\246r\247\322P\62"
-    "j\310\250\21\343\354\335\203\357\354w\3B$}\33\206Dj\226\214\42\61l\304\260\21\303F\14\33\61"
+    "j\310\250\21\343\354\335\203\357\354w\3B$}"
-    "\212\304\222MF\221\30v\316\236=\10\301b\11\0C\27}\33\236Si\226\20Bft\376O\211\215"
+    "\33\206Dj\226\214\42\61l\304\260\21\303F\14\33\61"
-    " Db\215\42$\0D\33}\33\206Dj\226\214\32\62l\304\260\21\343\354\177vl\304(\22K\324"
+    "\212\304\222MF\221\30v\316\236=\10\301b\11\0C\27}"
-    "$\2E\22|\373\205\17R\316KD\30\215\234_>x`\0F\20|\373\205\17R\316\227i\262\31"
+    "\33\236Si\226\20Bft\376O\211\215"
-    "\71\377\22\0I\7s\333\204\77HL\15{\333\205\201\363\377\77|\360`\0N$}\33\6\201\346\314"
+    " Db\215\42$\0D\33}\33\206Dj\226\214\32\62l\304\260\21\343\354\177vl\304("
-    "\35;\206\12U\242D&\306\230\30cd\210\221!fF\230\31a(+\314\256\63\67\0O\26}\33"
+    "\22K\324"
-    "\236Si\226\214\32\61\316\376\277\33\61j\310\232Tg\0R\61\216;\6Ek\230\14#\61n\304\270"
+    "$\2E\22|\373\205\17R\316KD\30\215\234_>x`\0F\20|"
-    "\21\343F\214\33\61n\304\60\22\243\210\60Q\224j\310\260\61\243\306\20\232\325\230QD\206\221\30\67b"
+    "\373\205\17R\316\227i\262\31"
-    "\334\301\1S\42\216;\236c\211\226\220\42\61n\304\270\21c\307R\232,[\262\203\307\216\65h\16\25"
+    "\71\377\22\0I\7s\333\204\77HL\15{\333\205\201\363\377\77|\360`\0N$}"
-    "\21&\253\320\0T\15}\33\206\17R\15\235\377\377\25\0U\21|\373\205a\366\377\237\215\30\64D\15"
+    "\33\6\201\346\314"
-    "*\63\0V\26\177\371\205\221\366\377\313\21\343\206\220\42C\25\11r'\313\16\3X)~;\206\201\6"
+    "\35;\206\12U\242D&\306\230\30cd\210\221!fF\230\31a(+\314\256\63\67\0O\26}"
-    "\217\221\30\66\204\20\31\42\244\206\14Cg\320$Q\222\6\315!\33\62\212\10\31BD\206\215 v\320"
+    "\33"
-    "\302\1x\24\312\272\205A\206\216\220@c\212\224\31$S\14\262h\0\0\0\0\4\377\377\0";
+    "\236Si\226\214\32\61\316\376\277\33\61j\310\232Tg\0R\61\216;\6Ek\230\14#"
+    "\61n\304\270"
+    "\21\343F\214\33\61n\304\60\22\243\210\60Q\224j\310\260\61\243\306\20\232"
+    "\325\230QD\206\221\30\67b"
+    "\334\301\1S\42\216;\236c\211\226\220\42\61n\304\270\21c\307R\232,["
+    "\262\203\307\216\65h\16\25"
+    "\21&\253\320\0T\15}\33\206\17R\15\235\377\377\25\0U\21|"
+    "\373\205a\366\377\237\215\30\64D\15"
+    "*\63\0V\26\177\371\205\221\366\377\313\21\343\206\220\42C\25\11r'"
+    "\313\16\3X)~;\206\201\6"
+    "\217\221\30\66\204\20\31\42\244\206\14Cg\320$Q\222\6\315!"
+    "\33\62\212\10\31BD\206\215 v\320"
+    "\302\1x\24\312\272\205A\206\216\220@c\212\224\31$"
+    "S\14\262h\0\0\0\0\4\377\377\0";
 
 #define play_icon_width 14
 #define play_icon_height 14
 static const unsigned char play_icon[28] PROGMEM = {
-    0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x7C, 0x00, 0xFC, 0x00, 0xFC, 0x03,
+    0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x7C, 0x00, 0xFC, 0x00,
-    0xFC, 0x0F, 0xFC, 0x0F, 0xFC, 0x03, 0xFC, 0x00, 0x7C, 0x00, 0x3C, 0x00,
+    0xFC, 0x03, 0xFC, 0x0F, 0xFC, 0x0F, 0xFC, 0x03, 0xFC, 0x00,
-    0x00, 0x00, 0x00, 0x00};
+    0x7C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00};
 static const unsigned char pause_icon[28] PROGMEM = {
-    0x00, 0x00, 0x00, 0x00, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E,
+    0x00, 0x00, 0x00, 0x00, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E,
-    0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E,
+    0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E,
-    0x38, 0x0E, 0x00, 0x00};
+    0x38, 0x0E, 0x38, 0x0E, 0x38, 0x0E, 0x00, 0x00};
 
 // Constants for screen layout and fonts
 constexpr uint8_t SCREEN_CENTER_X = 32;
@@ -100,8 +128,11 @@ constexpr uint8_t CHANNEL_BOX_HEIGHT = 14;
 enum ParamsMainPage : uint8_t {
   PARAM_MAIN_TEMPO,
   PARAM_MAIN_SOURCE,
+  PARAM_MAIN_RUN,
+  PARAM_MAIN_RESET,
   PARAM_MAIN_PULSE,
   PARAM_MAIN_ENCODER_DIR,
+  PARAM_MAIN_ROTATE_DISP,
   PARAM_MAIN_SAVE_DATA,
   PARAM_MAIN_LOAD_DATA,
   PARAM_MAIN_RESET_STATE,
@@ -116,22 +147,20 @@ enum ParamsChannelPage : uint8_t {
   PARAM_CH_DUTY,
   PARAM_CH_OFFSET,
   PARAM_CH_SWING,
-    PARAM_CH_EUC_STEPS,
-    PARAM_CH_EUC_HITS,
   PARAM_CH_CV1_DEST,
   PARAM_CH_CV2_DEST,
   PARAM_CH_LAST,
 };
 
 // Helper function to draw centered text
-void drawCenteredText(const char* text, int y, const uint8_t* font) {
+void drawCenteredText(const char *text, int y, const uint8_t *font) {
   gravity.display.setFont(font);
   int textWidth = gravity.display.getStrWidth(text);
   gravity.display.drawStr(SCREEN_CENTER_X - (textWidth / 2), y, text);
 }
 
 // Helper function to draw right-aligned text
-void drawRightAlignedText(const char* text, int y) {
+void drawRightAlignedText(const char *text, int y) {
   int textWidth = gravity.display.getStrWidth(text);
   int drawX = (SCREEN_WIDTH - textWidth) - MENU_BOX_PADDING;
   gravity.display.drawStr(drawX, y, text);
@@ -146,8 +175,10 @@ void drawMainSelection() {
   gravity.display.drawLine(0, 0, 0, tickSize);
   gravity.display.drawLine(mainWidth, 0, mainWidth - tickSize, 0);
   gravity.display.drawLine(mainWidth, 0, mainWidth, tickSize);
-    gravity.display.drawLine(mainWidth, mainHeight, mainWidth, mainHeight - tickSize);
+  gravity.display.drawLine(mainWidth, mainHeight, mainWidth,
-    gravity.display.drawLine(mainWidth, mainHeight, mainWidth - tickSize, mainHeight);
+                           mainHeight - tickSize);
+  gravity.display.drawLine(mainWidth, mainHeight, mainWidth - tickSize,
+                           mainHeight);
   gravity.display.drawLine(0, mainHeight, tickSize, mainHeight);
   gravity.display.drawLine(0, mainHeight, 0, mainHeight - tickSize);
   gravity.display.setDrawColor(2);
@@ -187,7 +218,8 @@ void drawMenuItems(String menu_items[], int menu_size) {
 
   for (int i = 0; i < min(menu_size, VISIBLE_MENU_ITEMS); ++i) {
     int idx = start_index + i;
-        drawRightAlignedText(menu_items[idx].c_str(), MENU_ITEM_HEIGHT * (i + 1) - 1);
+    drawRightAlignedText(menu_items[idx].c_str(),
+                         MENU_ITEM_HEIGHT * (i + 1) - 1);
   }
 }
 
@@ -197,7 +229,7 @@ inline void hollowTick() { gravity.display.drawBox(56, 4, 4, 4); }
 
 // Display an indicator when swing percentage matches a musical note.
 void swingDivisionMark() {
-    auto& ch = GetSelectedChannel();
+  auto &ch = GetSelectedChannel();
   switch (ch.getSwing()) {
   case 58: // 1/32nd
   case 66: // 1/16th
@@ -216,7 +248,8 @@ void swingDivisionMark() {
 String displaySaveSlot(int slot) {
   if (slot >= 0 && slot < StateManager::MAX_SAVE_SLOTS / 2) {
     return String("A") + String(slot + 1);
-    } else if (slot >= StateManager::MAX_SAVE_SLOTS / 2 && slot <= StateManager::MAX_SAVE_SLOTS) {
+  } else if (slot >= StateManager::MAX_SAVE_SLOTS / 2 &&
+             slot <= StateManager::MAX_SAVE_SLOTS) {
     return String("B") + String(slot - (StateManager::MAX_SAVE_SLOTS / 2) + 1);
   }
 }
@@ -255,11 +288,45 @@ void DisplayMainPage() {
     case Clock::SOURCE_EXTERNAL_PPQN_4:
       subText = F("4 PPQN");
       break;
+    case Clock::SOURCE_EXTERNAL_PPQN_2:
+      subText = F("2 PPQN");
+      break;
+    case Clock::SOURCE_EXTERNAL_PPQN_1:
+      subText = F("1 PPQN");
+      break;
     case Clock::SOURCE_EXTERNAL_MIDI:
       subText = F("MIDI");
       break;
     }
     break;
+  case PARAM_MAIN_RUN:
+    mainText = F("RUN");
+    switch (app.cv_run) {
+    case 0:
+      subText = F("NONE");
+      break;
+    case 1:
+      subText = F("CV 1");
+      break;
+    case 2:
+      subText = F("CV 2");
+      break;
+    }
+    break;
+  case PARAM_MAIN_RESET:
+    mainText = F("RST");
+    switch (app.cv_reset) {
+    case 0:
+      subText = F("NONE");
+      break;
+    case 1:
+      subText = F("CV 1");
+      break;
+    case 2:
+      subText = F("CV 2");
+      break;
+    }
+    break;
   case PARAM_MAIN_PULSE:
     mainText = F("OUT");
     switch (app.selected_pulse) {
@@ -281,6 +348,10 @@ void DisplayMainPage() {
     mainText = F("DIR");
     subText = app.selected_sub_param == 0 ? F("DEFAULT") : F("REVERSED");
     break;
+  case PARAM_MAIN_ROTATE_DISP:
+    mainText = F("DISP");
+    subText = app.selected_sub_param == 0 ? F("DEFAULT") : F("ROTATED");
+    break;
   case PARAM_MAIN_SAVE_DATA:
   case PARAM_MAIN_LOAD_DATA:
     if (app.selected_sub_param == StateManager::MAX_SAVE_SLOTS) {
@@ -321,12 +392,15 @@ void DisplayMainPage() {
   drawCenteredText(subText.c_str(), SUB_TEXT_Y, TEXT_FONT);
 
   // Draw Main Page menu items
-    String menu_items[PARAM_MAIN_LAST] = {F("TEMPO"), F("SOURCE"), F("PULSE OUT"), F("ENCODER DIR"), F("SAVE"), F("LOAD"), F("RESET"), F("ERASE")};
+  String menu_items[PARAM_MAIN_LAST] = {
+      F("TEMPO"),     F("RUN"),         F("RST"),         F("SOURCE"),
+      F("PULSE OUT"), F("ENCODER DIR"), F("ROTATE DISP"), F("SAVE"),
+      F("LOAD"),      F("RESET"),       F("ERASE")};
   drawMenuItems(menu_items, PARAM_MAIN_LAST);
 }
 
 void DisplayChannelPage() {
-    auto& ch = GetSelectedChannel();
+  auto &ch = GetSelectedChannel();
 
   gravity.display.setFontMode(1);
   gravity.display.setDrawColor(2);
@@ -366,24 +440,16 @@ void DisplayChannelPage() {
     subText = F("SHIFT HIT");
     break;
   case PARAM_CH_SWING:
-            ch.getSwing() == 50
+    ch.getSwing() == 50 ? mainText = F("OFF")
-                ? mainText = F("OFF")
                         : mainText = String(ch.getSwing(withCvMod)) + F("%");
     subText = "DOWN BEAT";
     swingDivisionMark();
     break;
-        case PARAM_CH_EUC_STEPS:
-            mainText = String(ch.getSteps(withCvMod));
-            subText = "EUCLID STEPS";
-            break;
-        case PARAM_CH_EUC_HITS:
-            mainText = String(ch.getHits(withCvMod));
-            subText = "EUCLID HITS";
-            break;
   case PARAM_CH_CV1_DEST:
   case PARAM_CH_CV2_DEST: {
     mainText = (app.selected_param == PARAM_CH_CV1_DEST) ? F("CV1") : F("CV2");
-            switch ((app.selected_param == PARAM_CH_CV1_DEST) ? ch.getCv1Dest() : ch.getCv2Dest()) {
+    switch ((app.selected_param == PARAM_CH_CV1_DEST) ? ch.getCv1Dest()
+                                                      : ch.getCv2Dest()) {
     case CV_DEST_NONE:
       subText = F("NONE");
       break;
@@ -402,12 +468,6 @@ void DisplayChannelPage() {
     case CV_DEST_SWING:
       subText = F("SWING");
       break;
-                case CV_DEST_EUC_STEPS:
-                    subText = F("EUCLID STEPS");
-                    break;
-                case CV_DEST_EUC_HITS:
-                    subText = F("EUCLID HITS");
-                    break;
     }
     break;
   }
@@ -418,8 +478,8 @@ void DisplayChannelPage() {
 
   // Draw Channel Page menu items
   String menu_items[PARAM_CH_LAST] = {
-        F("MOD"), F("PROBABILITY"), F("DUTY"), F("OFFSET"), F("SWING"), F("EUCLID STEPS"),
+      F("MOD"),   F("PROBABILITY"), F("DUTY"),   F("OFFSET"),
-        F("EUCLID HITS"), F("CV1 MOD"), F("CV2 MOD")};
+      F("SWING"), F("CV1 MOD"),     F("CV2 MOD")};
   drawMenuItems(menu_items, PARAM_CH_LAST);
 }
 
@@ -446,7 +506,8 @@ void DisplaySelectedChannel() {
     if (i == 0) {
       gravity.display.setBitmapMode(1);
       auto icon = gravity.clock.IsPaused() ? pause_icon : play_icon;
-            gravity.display.drawXBMP(2, boxY, play_icon_width, play_icon_height, icon);
+      gravity.display.drawXBMP(2, boxY, play_icon_width, play_icon_height,
+                               icon);
     } else {
       gravity.display.setFont(TEXT_FONT);
       gravity.display.setCursor((i * boxWidth) + textOffset, SCREEN_HEIGHT - 3);
@@ -477,10 +538,12 @@ void Bootsplash() {
     gravity.display.setFont(TEXT_FONT);
 
     textWidth = gravity.display.getStrWidth(StateManager::SKETCH_NAME);
-        gravity.display.drawStr(16 + (textWidth / 2), 20, StateManager::SKETCH_NAME);
+    gravity.display.drawStr(16 + (textWidth / 2), 20,
+                            StateManager::SKETCH_NAME);
 
     textWidth = gravity.display.getStrWidth(StateManager::SEMANTIC_VERSION);
-        gravity.display.drawStr(16 + (textWidth / 2), 32, StateManager::SEMANTIC_VERSION);
+    gravity.display.drawStr(16 + (textWidth / 2), 32,
+                            StateManager::SEMANTIC_VERSION);
 
     textWidth = gravity.display.getStrWidth(loadingText.c_str());
     gravity.display.drawStr(26 + (textWidth / 2), 44, loadingText.c_str());

firmware/Gravity/save_state.cpp

@@ -17,7 +17,9 @@
 
 // Define the constants for the current firmware.
 const char StateManager::SKETCH_NAME[] = "ALT GRAVITY";
-const char StateManager::SEMANTIC_VERSION[] = "V2.0.0BETA2";  // NOTE: This should match the version in the library.properties file.
+const char StateManager::SEMANTIC_VERSION[] =
+    "V2.0.1BETA1"; // NOTE: This should match the version in the
+                   // library.properties file.
 
 // Number of available save slots.
 const byte StateManager::MAX_SAVE_SLOTS = 10;
@@ -32,61 +34,82 @@ const int StateManager::EEPROM_DATA_START_ADDR = sizeof(StateManager::Metadata);
 
 StateManager::StateManager() : _isDirty(false), _lastChangeTime(0) {}
 
-bool StateManager::initialize(AppState& app) {
+bool StateManager::initialize(AppState &app) {
+  noInterrupts();
+  bool success = false;
   if (_isDataValid()) {
     // Load global settings.
     _loadMetadata(app);
     // Load app data from the transient slot.
     _loadState(app, TRANSIENT_SLOT);
-        return true;
+    success = true;
   }
   // EEPROM does not contain save data for this firmware & version.
   else {
-        // Erase EEPROM and initialize state. Save default pattern to all save slots.
+    // Erase EEPROM and initialize state. Save default pattern to all save
+    // slots.
     factoryReset(app);
-        return false;
   }
+  interrupts();
+  return success;
 }
 
-bool StateManager::loadData(AppState& app, byte slot_index) {
+bool StateManager::loadData(AppState &app, byte slot_index) {
   // Check if slot_index is within max range + 1 for transient.
-    if (slot_index >= MAX_SAVE_SLOTS + 1) return false;
+  if (slot_index >= MAX_SAVE_SLOTS + 1)
+    return false;
 
-    // Load the state data from the specified EEPROM slot and update the app state save slot.
+  noInterrupts();
+
+  // Load the state data from the specified EEPROM slot and update the app state
+  // save slot.
   _loadState(app, slot_index);
   app.selected_save_slot = slot_index;
-    // Persist this change in the global metadata.
+  // Persist this change in the global metadata on next update.
-    _saveMetadata(app);
+  _isDirty = true;
 
+  interrupts();
   return true;
 }
 
 // Save app state to user specified save slot.
-void StateManager::saveData(const AppState& app) {
+void StateManager::saveData(const AppState &app) {
+  noInterrupts();
   // Check if slot_index is within max range + 1 for transient.
-    if (app.selected_save_slot >= MAX_SAVE_SLOTS + 1) return;
+  if (app.selected_save_slot >= MAX_SAVE_SLOTS + 1) {
+    interrupts();
+    return;
+  }
 
   _saveState(app, app.selected_save_slot);
   _saveMetadata(app);
   _isDirty = false;
+  interrupts();
 }
 
-// Save transient state if it has changed and enough time has passed since last save.
+// Save transient state if it has changed and enough time has passed since last
-void StateManager::update(const AppState& app) {
+// save.
+void StateManager::update(const AppState &app) {
   if (_isDirty && (millis() - _lastChangeTime > SAVE_DELAY_MS)) {
+    noInterrupts();
     _saveState(app, TRANSIENT_SLOT);
     _saveMetadata(app);
     _isDirty = false;
+    interrupts();
   }
 }
 
-void StateManager::reset(AppState& app) {
+void StateManager::reset(AppState &app) {
+  noInterrupts();
+
   AppState default_app;
   app.tempo = default_app.tempo;
   app.selected_param = default_app.selected_param;
   app.selected_channel = default_app.selected_channel;
   app.selected_source = default_app.selected_source;
   app.selected_pulse = default_app.selected_pulse;
+  app.cv_run = default_app.cv_run;
+  app.cv_reset = default_app.cv_reset;
 
   for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
     app.channel[i].Init();
@@ -96,6 +119,7 @@ void StateManager::reset(AppState& app) {
   _loadMetadata(app);
 
   _isDirty = false;
+  interrupts();
 }
 
 void StateManager::markDirty() {
@@ -104,7 +128,7 @@ void StateManager::markDirty() {
 }
 
 // Erases all data in the EEPROM by writing 0 to every address.
-void StateManager::factoryReset(AppState& app) {
+void StateManager::factoryReset(AppState &app) {
   noInterrupts();
   for (unsigned int i = 0; i < EEPROM.length(); i++) {
     EEPROM.write(i, 0);
@@ -128,11 +152,11 @@ bool StateManager::_isDataValid() {
   return name_match && version_match;
 }
 
-void StateManager::_saveState(const AppState& app, byte slot_index) {
+void StateManager::_saveState(const AppState &app, byte slot_index) {
   // Check if slot_index is within max range + 1 for transient.
-    if (app.selected_save_slot >= MAX_SAVE_SLOTS + 1) return;
+  if (app.selected_save_slot >= MAX_SAVE_SLOTS + 1)
+    return;
 
-    noInterrupts();
   static EepromData save_data;
 
   save_data.tempo = app.tempo;
@@ -140,35 +164,33 @@ void StateManager::_saveState(const AppState& app, byte slot_index) {
   save_data.selected_channel = app.selected_channel;
   save_data.selected_source = static_cast<byte>(app.selected_source);
   save_data.selected_pulse = static_cast<byte>(app.selected_pulse);
+  save_data.cv_run = app.cv_run;
+  save_data.cv_reset = app.cv_reset;
 
   // TODO: break this out into a separate function. Save State should be
   // broken out into global / per-channel save methods. When saving via
   // "update" only save state for the current channel since other channels
   // will not have changed when saving user edits.
   for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
-        const auto& ch = app.channel[i];
+    const auto &ch = app.channel[i];
-        auto& save_ch = save_data.channel_data[i];
+    auto &save_ch = save_data.channel_data[i];
     save_ch.base_clock_mod_index = ch.getClockModIndex(false);
     save_ch.base_probability = ch.getProbability(false);
     save_ch.base_duty_cycle = ch.getDutyCycle(false);
     save_ch.base_offset = ch.getOffset(false);
-        save_ch.base_swing = ch.getSwing(false);
-        save_ch.base_euc_steps = ch.getSteps(false);
-        save_ch.base_euc_hits = ch.getHits(false);
     save_ch.cv1_dest = static_cast<byte>(ch.getCv1Dest());
     save_ch.cv2_dest = static_cast<byte>(ch.getCv2Dest());
   }
 
   int address = EEPROM_DATA_START_ADDR + (slot_index * sizeof(EepromData));
   EEPROM.put(address, save_data);
-    interrupts();
 }
 
-void StateManager::_loadState(AppState& app, byte slot_index) {
+void StateManager::_loadState(AppState &app, byte slot_index) {
   // Check if slot_index is within max range + 1 for transient.
-    if (slot_index >= MAX_SAVE_SLOTS + 1) return;
+  if (slot_index >= MAX_SAVE_SLOTS + 1)
+    return;
 
-    noInterrupts();
   static EepromData load_data;
   int address = EEPROM_DATA_START_ADDR + (slot_index * sizeof(EepromData));
   EEPROM.get(address, load_data);
@@ -179,26 +201,23 @@ void StateManager::_loadState(AppState& app, byte slot_index) {
   app.selected_channel = load_data.selected_channel;
   app.selected_source = static_cast<Clock::Source>(load_data.selected_source);
   app.selected_pulse = static_cast<Clock::Pulse>(load_data.selected_pulse);
+  app.cv_run = load_data.cv_run;
+  app.cv_reset = load_data.cv_reset;
 
   for (int i = 0; i < Gravity::OUTPUT_COUNT; i++) {
-        auto& ch = app.channel[i];
+    auto &ch = app.channel[i];
-        const auto& saved_ch_state = load_data.channel_data[i];
+    const auto &saved_ch_state = load_data.channel_data[i];
 
     ch.setClockMod(saved_ch_state.base_clock_mod_index);
     ch.setProbability(saved_ch_state.base_probability);
     ch.setDutyCycle(saved_ch_state.base_duty_cycle);
     ch.setOffset(saved_ch_state.base_offset);
-        ch.setSwing(saved_ch_state.base_swing);
-        ch.setSteps(saved_ch_state.base_euc_steps);
-        ch.setHits(saved_ch_state.base_euc_hits);
     ch.setCv1Dest(static_cast<CvDestination>(saved_ch_state.cv1_dest));
     ch.setCv2Dest(static_cast<CvDestination>(saved_ch_state.cv2_dest));
   }
-    interrupts();
 }
 
-void StateManager::_saveMetadata(const AppState& app) {
+void StateManager::_saveMetadata(const AppState &app) {
-    noInterrupts();
   Metadata current_meta;
   strcpy(current_meta.sketch_name, SKETCH_NAME);
   strcpy(current_meta.version, SEMANTIC_VERSION);
@@ -206,16 +225,15 @@ void StateManager::_saveMetadata(const AppState& app) {
   // Global user settings
   current_meta.selected_save_slot = app.selected_save_slot;
   current_meta.encoder_reversed = app.encoder_reversed;
+  current_meta.rotate_display = app.rotate_display;
 
   EEPROM.put(METADATA_START_ADDR, current_meta);
-    interrupts();
 }
 
-void StateManager::_loadMetadata(AppState& app) {
+void StateManager::_loadMetadata(AppState &app) {
-    noInterrupts();
   Metadata metadata;
   EEPROM.get(METADATA_START_ADDR, metadata);
   app.selected_save_slot = metadata.selected_save_slot;
   app.encoder_reversed = metadata.encoder_reversed;
-    interrupts();
+  app.rotate_display = metadata.rotate_display;
 }

firmware/Gravity/save_state.h

@@ -19,15 +19,15 @@
 struct AppState;
 
 /**
- * @brief Manages saving and loading of the application state to and from EEPROM.
+ * @brief Manages saving and loading of the application state to and from
- * The number of user slots is defined by MAX_SAVE_SLOTS, and one additional slot
+ * EEPROM. The number of user slots is defined by MAX_SAVE_SLOTS, and one
- * is reseved for transient state to persist state between power cycles before
+ * additional slot is reseved for transient state to persist state between power
- * state is explicitly saved to a user slot. Metadata is stored in the beginning
+ * cycles before state is explicitly saved to a user slot. Metadata is stored in
- * of the memory space which stores firmware version information to validate that
+ * the beginning of the memory space which stores firmware version information
- * the data can be loaded into the current version of AppState.
+ * to validate that the data can be loaded into the current version of AppState.
  */
 class StateManager {
-   public:
+public:
   static const char SKETCH_NAME[];
   static const char SEMANTIC_VERSION[];
   static const byte MAX_SAVE_SLOTS;
@@ -36,19 +36,19 @@ class StateManager {
   StateManager();
 
   // Populate the AppState instance with values from EEPROM if they exist.
-    bool initialize(AppState& app);
+  bool initialize(AppState &app);
   // Load data from specified slot.
-    bool loadData(AppState& app, byte slot_index);
+  bool loadData(AppState &app, byte slot_index);
   // Save data to specified slot.
-    void saveData(const AppState& app);
+  void saveData(const AppState &app);
   // Reset AppState instance back to default values.
-    void reset(AppState& app);
+  void reset(AppState &app);
   // Call from main loop, check if state has changed and needs to be saved.
-    void update(const AppState& app);
+  void update(const AppState &app);
   // Indicate that state has changed and we should save.
   void markDirty();
   // Erase all data stored in the EEPROM.
-    void factoryReset(AppState& app);
+  void factoryReset(AppState &app);
 
   // This struct holds the data that identifies the firmware version.
   struct Metadata {
@@ -57,15 +57,13 @@ class StateManager {
     // Additional global/hardware settings
     byte selected_save_slot;
     bool encoder_reversed;
+    bool rotate_display;
   };
   struct ChannelState {
     byte base_clock_mod_index;
     byte base_probability;
     byte base_duty_cycle;
     byte base_offset;
-        byte base_swing;
-        byte base_euc_steps;
-        byte base_euc_hits;
     byte cv1_dest; // Cast the CvDestination enum as a byte for storage
     byte cv2_dest; // Cast the CvDestination enum as a byte for storage
   };
@@ -76,15 +74,17 @@ class StateManager {
     byte selected_channel;
     byte selected_source;
     byte selected_pulse;
+    byte cv_run;
+    byte cv_reset;
     ChannelState channel_data[Gravity::OUTPUT_COUNT];
   };
 
-   private:
+private:
   bool _isDataValid();
-    void _saveMetadata(const AppState& app);
+  void _saveMetadata(const AppState &app);
-    void _loadMetadata(AppState& app);
+  void _loadMetadata(AppState &app);
-    void _saveState(const AppState& app, byte slot_index);
+  void _saveState(const AppState &app, byte slot_index);
-    void _loadState(AppState& app, byte slot_index);
+  void _loadState(AppState &app, byte slot_index);
 
   static const unsigned long SAVE_DELAY_MS;
   static const int METADATA_START_ADDR;

library.properties

@@ -1,5 +1,4 @@
-name=libGravity
+version=2.0.1beta1
-version=2.0.0beta2
 author=Adam Wonak
 maintainer=awonak <github.com/awonak>
 sentence=Hardware abstraction library for Sitka Instruments Gravity eurorack module

src/analog_input.h

@@ -18,7 +18,9 @@ const int CALIBRATED_LOW = -566;
 const int CALIBRATED_HIGH = 512;
 
 class AnalogInput {
-   public:
+public:
+  static const int GATE_THRESHOLD = 0;
+
   AnalogInput() {}
   ~AnalogInput() {}
 
@@ -41,7 +43,8 @@ class AnalogInput {
     int raw = analogRead(pin_);
     read_ = map(raw, 0, MAX_INPUT, low_, high_);
     read_ = constrain(read_ - offset_, -512, 512);
-        if (inverted_) read_ = -read_;
+    if (inverted_)
+      read_ = -read_;
   }
 
   // Set calibration values.
@@ -50,7 +53,7 @@ class AnalogInput {
 
   void AdjustCalibrationHigh(int amount) { high_ += amount; }
 
-    void SetOffset(float percent) { offset_ = -(percent)*512; }
+  void SetOffset(float percent) { offset_ = -(percent) * 512; }
 
   void SetAttenuation(float percent) {
     low_ = abs(percent) * CALIBRATED_LOW;
@@ -74,7 +77,20 @@ class AnalogInput {
    */
   inline float Voltage() { return ((read_ / 512.0) * 5.0); }
 
-   private:
+  /**
+   * Checks for a rising edge transition across a threshold.
+   *
+   * @param threshold The value that the input must cross.
+   * @return True if the value just crossed the threshold from below, false
+   * otherwise.
+   */
+  inline bool IsRisingEdge(int16_t threshold) const {
+    bool was_high = old_read_ > threshold;
+    bool is_high = read_ > threshold;
+    return is_high && !was_high;
+  }
+
+private:
   uint8_t pin_;
   int16_t read_;
   uint16_t old_read_;

src/clock.h

@@ -17,7 +17,8 @@
 #include "peripherials.h"
 #include "uClock/uClock.h"
 
-// MIDI clock, start, stop, and continue byte definitions - based on MIDI 1.0 Standards.
+// MIDI clock, start, stop, and continue byte definitions - based on MIDI 1.0
+// Standards.
 #define MIDI_CLOCK 0xF8
 #define MIDI_START 0xFA
 #define MIDI_STOP 0xFC
@@ -28,13 +29,15 @@ static ExtCallback extUserCallback = nullptr;
 static void serialEventNoop(uint8_t msg, uint8_t status) {}
 
 class Clock {
-   public:
+public:
   static constexpr int DEFAULT_TEMPO = 120;
 
   enum Source {
     SOURCE_INTERNAL,
     SOURCE_EXTERNAL_PPQN_24,
     SOURCE_EXTERNAL_PPQN_4,
+    SOURCE_EXTERNAL_PPQN_2,
+    SOURCE_EXTERNAL_PPQN_1,
     SOURCE_EXTERNAL_MIDI,
     SOURCE_LAST,
   };
@@ -64,7 +67,8 @@ class Clock {
     uClock.start();
   }
 
-    // Handle external clock tick and call user callback when receiving clock trigger (PPQN_4, PPQN_24, or MIDI).
+  // Handle external clock tick and call user callback when receiving clock
+  // trigger (PPQN_4, PPQN_24, or MIDI).
   void AttachExtHandler(void (*callback)()) {
     extUserCallback = callback;
     attachInterrupt(digitalPinToInterrupt(EXT_PIN), callback, RISING);
@@ -79,7 +83,8 @@ class Clock {
   void SetSource(Source source) {
     bool was_playing = !IsPaused();
     uClock.stop();
-        // If we are changing the source from MIDI, disable the serial interrupt handler.
+    // If we are changing the source from MIDI, disable the serial interrupt
+    // handler.
     if (source_ == SOURCE_EXTERNAL_MIDI) {
       NeoSerial.attachInterrupt(serialEventNoop);
     }
@@ -96,6 +101,14 @@ class Clock {
       uClock.setClockMode(uClock.EXTERNAL_CLOCK);
       uClock.setInputPPQN(uClock.PPQN_4);
       break;
+    case SOURCE_EXTERNAL_PPQN_2:
+      uClock.setClockMode(uClock.EXTERNAL_CLOCK);
+      uClock.setInputPPQN(uClock.PPQN_2);
+      break;
+    case SOURCE_EXTERNAL_PPQN_1:
+      uClock.setClockMode(uClock.EXTERNAL_CLOCK);
+      uClock.setInputPPQN(uClock.PPQN_1);
+      break;
     case SOURCE_EXTERNAL_MIDI:
       uClock.setClockMode(uClock.EXTERNAL_CLOCK);
       uClock.setInputPPQN(uClock.PPQN_24);
@@ -107,7 +120,8 @@ class Clock {
     }
   }
 
-    // Return true if the current selected source is externl (PPQN_4, PPQN_24, or MIDI).
+  // Return true if the current selected source is externl (PPQN_4, PPQN_24, or
+  // MIDI).
   bool ExternalSource() {
     return uClock.getClockMode() == uClock.EXTERNAL_CLOCK;
   }
@@ -118,41 +132,28 @@ class Clock {
   }
 
   // Returns the current BPM tempo.
-    int Tempo() {
+  int Tempo() { return uClock.getTempo(); }
-        return uClock.getTempo();
-    }
 
   // Set the clock tempo to a int between 1 and 400.
-    void SetTempo(int tempo) {
+  void SetTempo(int tempo) { return uClock.setTempo(tempo); }
-        return uClock.setTempo(tempo);
-    }
 
-    // Record an external clock tick received to process external/internal syncronization.
+  // Record an external clock tick received to process external/internal
-    void Tick() {
+  // syncronization.
-        uClock.clockMe();
+  void Tick() { uClock.clockMe(); }
-    }
 
   // Start the internal clock.
-    void Start() {
+  void Start() { uClock.start(); }
-        uClock.start();
-    }
 
   // Stop internal clock clock.
-    void Stop() {
+  void Stop() { uClock.stop(); }
-        uClock.stop();
-    }
 
   // Reset all clock counters to 0.
-    void Reset() {
+  void Reset() { uClock.resetCounters(); }
-        uClock.resetCounters();
-    }
 
   // Returns true if the clock is not running.
-    bool IsPaused() {
+  bool IsPaused() { return uClock.clock_state == uClock.PAUSED; }
-        return uClock.clock_state == uClock.PAUSED;
-    }
 
-   private:
+private:
   Source source_ = SOURCE_INTERNAL;
 
   static void onSerialEvent(uint8_t msg, uint8_t status) {
@@ -175,17 +176,11 @@ class Clock {
     }
   }
 
-    static void sendMIDIStart() {
+  static void sendMIDIStart() { NeoSerial.write(MIDI_START); }
-        NeoSerial.write(MIDI_START);
-    }
 
-    static void sendMIDIStop() {
+  static void sendMIDIStop() { NeoSerial.write(MIDI_STOP); }
-        NeoSerial.write(MIDI_STOP);
-    }
 
-    static void sendMIDIClock(uint32_t tick) {
+  static void sendMIDIClock(uint32_t tick) { NeoSerial.write(MIDI_CLOCK); }
-        NeoSerial.write(MIDI_CLOCK);
-    }
 };
 
 #endif

src/digital_output.h

@@ -16,7 +16,7 @@
 const byte DEFAULT_TRIGGER_DURATION_MS = 5;
 
 class DigitalOutput {
-   public:
+public:
   /**
    * Initializes an CV Output paired object.
    *
@@ -43,8 +43,10 @@ class DigitalOutput {
    * @param state Arduino digital HIGH or LOW values.
    */
   inline void Update(uint8_t state) {
-        if (state == HIGH) High();  // Rising
+    if (state == HIGH)
-        if (state == LOW) Low();    // Falling
+      High(); // Rising
+    if (state == LOW)
+      Low(); // Falling
   }
 
   // Sets the cv output HIGH to about 5v.
@@ -65,7 +67,8 @@ class DigitalOutput {
    * Return a bool representing the on/off state of the output.
    */
   inline void Process() {
-        // If trigger is HIGH and the trigger duration time has elapsed, set the output low.
+    // If trigger is HIGH and the trigger duration time has elapsed, set the
+    // output low.
     if (on_ && (millis() - last_triggered_) >= trigger_duration_) {
       update(LOW);
     }
@@ -78,11 +81,10 @@ class DigitalOutput {
    */
   inline bool On() { return on_; }
 
-   private:
+private:
   unsigned long last_triggered_;
   uint8_t trigger_duration_;
   uint8_t cv_pin_;
-    uint8_t led_pin_;
   bool on_;
 
   void update(uint8_t state) {